IE-2000-4S-TS-G-B - Cisco Industrial Ethernet 2000 Series Switch

IE-2000-4S-TS-G-B exact hardware and software boundary

IE-2000-4S-TS-G-B is a Cisco Industrial Ethernet 2000 Series switch with four 100-Mbps SFP access ports and two Gigabit SFP uplinks. Cisco orders this exact PID with the LAN Base software tier. The port media and license suffix are procurement facts, not interchangeable marketing labels.

Feature entitlement

IEEE 1588 timing is not listed for this exact order profile. L2NAT status: Not included in this order profile. This order does not select the four-port PoE+ PTC hardware profile. This exact suffix is not the conformal-coated X or NX order.

Model-specific purchase decision

This all-fiber B model is materially different from copper-access IE 2000 orders. The bill of materials must identify six optical positions, approved SFPs, fiber type, connector cleaning and optical-loss acceptance for both FE access and GE uplink segments.

Primary dossier: Receiving inspection

For this order, treat the following as the lead acceptance record rather than a generic checklist. Compare the complete PID, label, serial, software tier, coating requirement and visible condition with the authorized order. Quarantine substitutions because nearby IE 2000 variants have materially different ports and entitlements. Link the completed evidence to IE-2000-4S-TS-G-B, its serial number and the authorized purchase line.

Photograph the carton and chassis labels, then reconcile complete PID, serial, port layout, software suffix and coating selection against the purchase line. Check connector damage and supplied accessories without assuming optional parts are included. A mismatch should remain quarantined until engineering confirms the exact substitution impact.

Secondary control: Optical bill of materials

This is the second product-specific release control for the order. Where SFP interfaces are present, bind the exact transceiver, wavelength, fiber type, connector path and optical budget to the port. A generic SFP description is insufficient for an industrial fiber acceptance record. Reconcile the result with the exact port configuration and software tier stated above before handover.

Operational proof: Alarm-contact handover

Where cabinet alarm I/O is used, identify the wired condition, receiving system, severity and test result. An untested alarm wire should not be counted as operational monitoring for the switch. Preserve the result as a dated part of this model's acceptance file rather than reusing evidence from another IE 2000 variant.

Published lifecycle

Cisco lists 26 July 2024 as the last order date, 26 July 2025 as the end of software maintenance, 26 July 2027 as the end of vulnerability and security support, and 31 July 2029 as the last support date for the affected IE 2000 products. The migration reference for this line is IE-3100-8T4S-E; validate the complete replacement design rather than assuming equivalence.

Related IE 2000 order records

• IE-2000-4TS-B - compare port media, software tier and industrial feature boundary.
• IE-2000-4T-G-B - compare port media, software tier and industrial feature boundary.
• IE-2000-4TS-G-B - compare port media, software tier and industrial feature boundary.

Official evidence: Cisco IE 2000 Series data sheet; Cisco IE 2000 lifecycle bulletin; and Cisco IE 2000 support page.