Cisco ASR5K-FANT-UP Upper Exhaust Fan Tray for ASR 5000 is listed by YYST Global for buyers looking for CISCO ASR 5000 Series. ASR5K-FANT-UP is the upper ASR 5000 fan tray that exhausts warmed chassis air through the upper rear and side vents; it is position-specific and is not the lower intake assembly. The listed condition is New Factory Sealed. The reference price is US$ 1,935.00. Contact our sales team to validate compatibility, scope, fulfillment and lead time before ordering.
ASR5K-FANT-UP is Cisco's upper fan tray for the ASR 5000 chassis. Cisco documents this assembly as the upper exhaust stage: it draws heated air through the chassis and discharges it from the upper rear and sides. The exact position and airflow role distinguish it from lower intake SKU ASR5K-FANT-LW.
Use the upper SKU when inventory, alarm and physical inspection identify the upper fan controller or exhaust assembly. Before ordering, capture the chassis PID and serial, fan-controller state, speed, exhaust temperature, alarm text and current tray PID/version. Rule out blocked rear clearance, an upstream lower-intake problem or a system-wide thermal condition before replacing the exhaust tray.
Follow the Cisco installation procedure and site safety rules. Have the verified upper replacement available before removing the installed unit, preserve ESD protection and allow rotating fans to stop before handling. Record the maintenance authority, rollback condition and maximum permitted exposure time for the running chassis; do not use instructions for the later ASR 5500 as proof of ASR 5000 interchangeability.
After seating the tray and restoring its cover, check the exact PID and serial in hardware inventory. Confirm upper fan-controller state, stable fan speed, exhaust temperature and alarm clearance. Observe the chassis through representative load and verify that the upper-rear path is not recirculating hot air into adjacent equipment.
Cisco lists ASR5K-FANT-UP and the spare form `ASR5K-FANT-UP=` in the ASR 5000 end-of-sale/end-of-life notice and recommends migration planning for the platform. Treat remaining stock as a legacy maintenance purchase: document condition, revision, source traceability and compatibility, and pair the repair with a migration or spares-risk decision.
This order does not replace the lower intake tray, particulate filter, power filter unit or chassis. It does not include an ASR 5500 front/rear fan set. Match the exact ASR 5000 location and PID rather than selecting a fan by enclosure appearance.
Official Cisco sources: ASR 5000 airflow and fan-tray architecture, ASR 5000 exact PID and lifecycle notice and Cisco fan-controller state reference.
| Exact model / SKU | ASR5K-FANT-UP |
| Cisco product ID | ASR5K-FANT-UP |
| Component | Upper fan tray for Cisco ASR 5000 |
| Airflow role | Exhausts warmed air from the upper rear and sides of the chassis |
| Diagnostic target | Upper Fan Controller state, speed, exhaust temperature and related alarms |
| Pre-order match | ASR 5000 chassis PID/serial plus installed upper tray PID/version |
| Acceptance | Correct inventory, normal upper controller, stable speed/temperature, alarm clear and unobstructed exhaust |
| Lifecycle status | Listed in Cisco ASR 5000 end-of-sale/end-of-life announcement |
| Not interchangeable with | ASR5K-FANT-LW lower intake tray or ASR 5500 fan assemblies |
| Source match | Exact ASR5K-FANT-UP upper exhaust identity, airflow role, controller evidence and lifecycle status verified in Cisco official installation, command and EOL references |
| Official manufacturer reference | Cisco ASR 5000 Hardware Platform Overview |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Cisco ASR5K-FANT-UP Upper Exhaust Fan Tray for ASR 5000 is a CISCO accessory or component in the ASR 5000 Series category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
The current reference price for ASR5K-FANT-UP is US$ 1,935.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

ASR5K-FANT-LW is the lower ASR 5000 fan tray that pulls ambient air into the lower front and sides and pushes it upward across the cards and midplane.

ASR5K-011G2-LX-K9= is Cisco's spare PID for the second-generation ASR 5000 GLC2 one-port Gigabit Ethernet line card supplied with a 1000BASE-LX single-mode SFP.

ASR5K-SW-R8C-K9= is Cisco's spare orderable PID for ASR 5000 Release 8 CDMA and general system software.

ASR5K-SW-R8C-K9 identifies Cisco ASR 5000 Release 8 system software for CDMA and general functions; Cisco later named Release 12.0 software as its migration replacement.

ASR5K-4OC3C-MM-K9= is the spare PID for Cisco's ASR 5000 OLC2 four-port ATM STM-1c/OC-3c line card with multimode SFP interfaces.

ASR5K-042GE-LX-K9= is the spare PID for Cisco's second-revision ASR 5000 four-port QGLC with LX single-mode long-haul SFP interfaces.

ASR5K-041GE-LX-K9= is the spare form of Cisco's original ASR 5000 four-port QGLC, supplied with LX single-mode long-haul SFP interfaces.

ASR5K-BLNK-FR is Cisco's front blanking panel for an unused ASR 5000 front application-card slot.