Table 4-128 Basic information about the CE6865E-48S8CQ
Item | Details |
---|---|
Description | CE6865E-48S8CQ switch (48*25G SFP28, 8*100G QSFP28, without fan and power modules) |
Part Number | 02354CPT |
Model | CE6865E-48S8CQ |
First supported version | V200R021C00 |
Other part numbers | 02354CPN (CE6865E-48S8CQ switch (48*25G SFP28, 8*100G QSFP28, 2*AC power modules, 4*fan modules, port-side intake)) 02354CPV (CE6865E-48S8CQ switch (48*25G SFP28, 8*100G QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)) |
Short Name | CE6865E |
Table 4-132 Technical specifications of the CE6865E-48S8CQ
Item | Specification |
---|---|
Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.) |
Dimensions without packaging (H x W x D) [mm (in.)] |
|
Weight without packaging [kg (lb)] | 6.2 kg (13.67 lb), excluding optical modules, power modules, and fan modules |
Weight without packaging (full configuration) [kg (lb)] | 8.8 kg (19.40 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
Weight with packaging [kg (lb)] | 9.45 kg (20.83 lb) |
Weight with packaging (full configuration) [kg (lb)] | 11.75 kg (25.9 lb) |
Chassis height [U] | 1 U |
Installation Type | Cabinet Installation |
Switching capacity | To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel. |
CPU | 4-core, 1.4 GHz |
Memory | DRAM: 4 GB |
NOR Flash | 64 MB |
NAND Flash | 4 GB |
USB | Supported |
Power supply mode |
|
Console port | RJ45 |
Downlink Service interface | 48*25GE SFP28 NOTE: 1. A 25GE port works at 25 Gbit/s by default and cannot work at 1 Gbit/s or 10 Gbit/s through auto-sensing, but can be configured to work at 10 Gbit/s or 1 Gbit/s through commands. When a 25GE port is configured to work at 10 Gbit/s or 1 Gbit/s, the rate of the other three ports in the same group also needs to be switched. The rate of a single port cannot be switched independently. 2. 10GE LRM/80 km linear optical modules are not supported. 3. The 1000BASE-X auto-negotiation function is not supported. To connect the two interfaces at both ends of a link, disable the auto-negotiation function of the peer interface. After the connection, in some port failure scenarios, the interface on one end may be Up and the interface on the other end may be Down. 4. GE copper modules cannot be installed in ports directly above or below another GE copper module. |
Uplink Service interface | 8*100GE QSFP28 (Note: Each 100G QSFP28 port can be configured to work at 40 Gbit/s, and can be split into four 10GE or 25GE ports. After split, they cannot be used as GE ports.) |
Service port supporting the stack function | 25GE optical ports, and 100GE optical ports |
RTC | Supported |
Typical power consumption [W] |
|
Typical heat dissipation [BTU/hour] | 610 BTU/hour (100% traffic load, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) 791 BTU/hour (100% traffic load, short-distance optical modules on all ports, dual power modules) |
Static power consumption [W] | 133 W |
Static heat dissipation [BTU/hour] | 453 BTU/hour |
Maximum power consumption [W] | 378 W |
Maximum heat dissipation [BTU/hour] | 1290 BTU/hour |
Number of power modules | 2 |
Redundant power supply | 1+1 backup |
Rated input voltage [V] |
|
Input voltage range [V] |
|
Maximum input current [A] |
|
Rated output power [W] |
|
Certification |
|
Power supply surge protection [kV] | AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
Types of fans | Pluggable |
Number of fan modules | 4 |
Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Heat dissipation mode | Air cooling |
Airflow direction | Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules |
Availability | 0.9999966836 |
MTBF [year] | 36.9 years |
Noise at normal temperature (27°C, sound pressure) [dB(A)] | Front-to-back airflow: 49.8 dB(A) on average (maximum: 53.6 dB(A)) Back-to-front airflow: 47.8 dB(A) on average (maximum: 51.2 dB(A)) |
Noise at high temperature (40°C, sound pressure) [dB(A)] | Front-to-back airflow: 67.6 dB(A) on average (maximum: 73.4 dB(A)) Back-to-front airflow: 68 dB(A) on average (maximum: 75.4 dB(A)) |
Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) NOTE: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |