R230D Huawei R200 Series Indoor 802.11ac Wave 1 2x2 MIMO Access Point

The R230D is a remote radio unit (RRU) used in Huawei agile distributed Wi-Fi solution, recommended for environments with complex wall structures and a high-density of rooms, such as schools, hotels, apartments, and office meeting rooms. Huawei R230D uses an 86 mm plate in compliance with international standards and can be easily installed into a junction box in a room. 

It is equipped with a built-in antenna and a hidden indicator; therefore, installation of the RRU does not affect indoor decorations and designs. It also has an IEEE 802.11a/b/g/n/ac wireless module and can be connected to wireless terminals, such as the laptops, tablets, and smartphones. 802.3af standards compliance makes cable routing easier for the R230D.

The RU uses an 86 mm plate in compliance with international standards and can be easily installed into a junction box in a room. It is equipped with a built-in antenna and a hidden indicator; therefore, installation of the RU does not affect indoor decorations and designs. It also has an IEEE 802.11a/b/g/n/ac wireless module and can work on both 5 GHz and 2.4 GHz frequency bands.

The RUs are managed by the central AP. The central AP and RUs are plug-and-play and can be managed and maintained in real time. Compared with traditional distributed AP solutions, the AC in Huawei agile distributed Wi-Fi solution needs to manage a smaller number of APs. A large number of RUs can be deployed, which improves the overall performance and reduces network deployment costs.

PoE port surge protection	PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 4kV (1.2/50 us, 42 ohm), B criterion FE: Common mode (eight pairs of cables-GND), 4kV (1.2/50 us, 42 ohm), B criterion
Ingress protection	IP20
Atmospheric pressure	53~106Kpa ETSI 300 019-2-3
Ground/floating ground	Floating ground
Operating temperature	Operating temperature: 0~40℃ Storage temperature: -40~70℃
Altitude	The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m.
Humidity	5%~95%
FCC	Supported
Wi-Fi alliance	Supported
Certification of Radio Association of China	CMIIT ID;
Safety certification	EN 60950-1
Environment certification	RoHS
MIMO	2×2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported.
Wi-Fi standard	802.11b/g/n802.11a/n/ac
Antenna gain (Typical)	2.4G:3dBi 5G:4dBi
Radio power (Max)	2.4G: 20dBm(Max) 5G: 18dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 17dBm/chain(Max) 5G : 15dBm/chain(Max))
Radio port/built-in antenna	Built-in antenna, Dual bands, 2×2 MIMO
Power consumption of the device	5.1W
Ethernet ports	FE(RJ45) x 1, 100base-T, 10M/100M auto negotiation speed
Weight (kg)	0.1kg
Dimensions (W x D x H) (mm)	86*120*26 (note: without hump on the backside)
LED indicator	One two-color LED indicator
AP PoE input	802.3af