AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point
AP2051DN-EAP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point
- 763 412 7282
- +86 010 82830816
AP2051DN-E Overview
Huawei AP2051DN-E is the gigabit wall plate access points (APs) in compliance with 802.11ac Wave 2. With mounting brackets, the APs can be easily adapted to junction boxes (86/118/120 mm) and wall-mounting scenarios. The APs boast built-in smart antennas, a hidden indicator, and a brand-new "morning dew" style. These highlights make the APs suitable for environments with densely distributed small rooms, such as hotel guest rooms, student dormitories, hospital wards, and small offices The APs provide enhanced service support capabilities and feature high security, easy network deployment, automatic AC discovery and configuration and real-time management and maintenance. The APs can connect to wireless terminals through wireless connections or to wired terminals using wired cables. This makes them the ideal choice of customers to construct indoor distributed networks.
● 802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies, peak rate of 400 Mbit/s at 2.4 GHz and 867 Mbit/s at 5 GHz, and 1.267 Gbit/s for the device
● One GE uplink interface, four GE downlink interfaces, and two RJ45 passthrough phone ports
● Various installation modes for easy deployment, including ceiling-mounting, wall-mounting, plate-mounting, and desk-mounting
● USB interface used for external power supply and storage
● Built-in smart antennas, increasing the coverage area
● AP2051DN-E: the PoE out function, supplying power for terminals such as IP phones
● AP2051DN-E: Built-in Bluetooth to implement positioning with eSight
● Support for the Fat, Fit, and cloud modes
● Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
The AP2051DN-E is wall plate APs that can be easily installed in junction boxes (86 mm/120 mm/118 mm) without damaging indoor decoration. The hidden indicator design and the optimized indicator luminance of the AP2051DN-E reduce the light impact on users. The indicator can also be shut down through the software as required. The built-in smart antennas of the AP2051DN-E help achieve better coverage in bathrooms, balconies, and scenarios with obstacles. The APs provide comprehensive service support capabilities, and feature high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance. The APs can connect to wireless terminals through wireless connections or to wired terminals using wired cables. This makes the APs ideal choice for constructing indoor distributed Wi-Fi networks.
The AP2051DN-E offer both wired and wireless network connections, and are applicable to hotels, apartments, and offices.
A cloud AP must be used together with a cloud server.
AP2051DN-E Specification
| PoE port protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection level | IP20 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/Floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Temperature range | Operating temperature: 0~40℃ Storage temperature: -40~70℃ |
| Humidity range | 5%~95% |
| CE certification | CE(Rohs, Reach, WEEE) |
| Wi-Fi Alliance | Supported |
| Certificate in China | CMIIT ID;CCC;/Certified by the Radio Regulatory Commission/Network Access License of the Ministry of Industry and Information Technology |
| Other certifications (IC/C-Tick) | RCM; BT |
| Safety regulation | EN 60950-1 |
| Environmental protection | RoHS |
| MIMO | 2x2:2Multiple-input multiple-output (MIMO). For example, 4x4:4 indicates 4SU and 4MU. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain | 2.4G:3dB 5G:4dB(for claim) |
| Radio power (maximum) | 2.4G: 23dBm(Max) 5G: 23dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G : 20dBm/chain)(Max) |
| RF ports and built-in antennas | Built-in smart antenna, Dual bands, 2x2 MIMO |
| Device power consumption | 11.5 W (not including USB or PoE out)14.5 W (including USB of 2.5 W) |
| Ethernet interface | 7xRJ45: 1) In-wall: 1xGE (RJ45, PoE In, 10M/100M/1000M auto, b.1x Pass-Through(RJ45)); 2) outside wall: 4xGE (RJ45, 10M/100M/1000M auto with a port PoE out); b.1x Pass-Through(RJ45) |
| Weight (kg) | 0.25kg |
| Dimensions (H x W x D, in mm) | 86*150*32.5 (note: without hump on the backside) |
| LED indicator | One two-color LED indicator |
| Preferential Selection of Power Supply (DC Input/PoE Input When Both Power Supply Modes Exist) | No priorityNote: 1) Hot backup is not supported between DC and PoE inputs. 2) When the two power supply modes coexist, the DC input range must be 12 V±5%. 1. Differentiate priorities and connect to the power supply with a higher priority. 2. The input source with a higher voltage is used as the main power supply regardless of the priority. Both the input source and the input source may supply power due to the voltage difference of the power adapter, the output voltage difference of the switch, the length of the network cable, and the impedance of the network cable. 3. Hot backup is supported. The system does not restart when one of them is removed. 4. Hot backup is not supported. If one of them is removed, the device may restart. |
| DC input | 45.6V-57V |
| Power supply (input) for PoE out | The PoE out has the same input with the system Power (PoE_IN or 48V DC power supply) |
| PoE input | 802.3af/at (only supported by in-wall GE0 port) |
AP2051DN-E Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
