AP2050DN-E Huawei AP2000 Series 802.11ac 2x2 MU-MIMO Access Point
AP2050DN-EAP2050DN-E Huawei AP2000 Series 802.11ac 2x2 MU-MIMO Access Point
- 763 412 7282
- +86 010 82830816
AP2050DN-E Overview
Huawei AP2050DN-E is latest-generation gigabit wall plate access points (APs) in compliance with 802.11ac Wave 2. They use an 86 mm x 86 mm plate design and can be easily installed in a standard 86-type junction box. The APs are beautifully designed, with built-in antennas, a hidden indicator, and a sliding panel. These highlights make the APs suitable for environments with densely distributed small rooms, such as hotel guest rooms, student dormitories, hospital wards, and small offices The APs provide enhanced service support capabilities and feature high security, easy network deployment, automatic AC discovery and configuration and real-time management and maintenance. The APs can connect to wireless terminals through wireless connections or to wired terminals using wired cables. This makes them the ideal choice of customers to construct indoor distributed networks.
● 802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies, peak rate of 400 Mbit/s at 2.4 GHz and 867 Mbit/s at 5 GHz, and 1.267 Gbit/s for the device
● One GE uplink interface, four GE downlink interfaces, and two RJ45 passthrough phone ports
● USB interface used for external power supply and storage
● AP2050DN-E: Built-in Bluetooth to implement positioning with eSight
● AP2050DN-E: PoE out function, supplying power for terminals such as IP phones
● Various installation modes for easy deployment, including ceiling-mounting, wall-mounting, plate-mounting, and desk-mounting
● Support for the Fat, Fit, and cloud modes
● Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
The AP2050DN-E use an 86 mm x 86 mm plate design and can be easily installed in standard 86-type boxes. The APs are equipped with a built-in antenna, a hidden indicator, and a slide panel; therefore, installation of the AP2050DN and AP2050D does not affect indoor decorations and designs. The AP2050DN-E also have a built-in IEEE 802.11a/b/g/n/ac/ac Wave 2 wireless module and can provide wired connections through network cables and phone lines as well as wireless connections. This makes the AP2050DN and AP2050DN-E the ideal choice of customers to construct indoor distributed networks in hotel, apartment, and office scenarios.
A cloud AP must be used together with a cloud server.
AP2050DN-E Specification
| PoE port protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection level | IP20 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/Floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Temperature range | Operating temperature: 0~40℃ Storage temperature: -40~70℃ |
| Humidity range | 5%~95% |
| CE certification | CE(Rohs, Reach, WEEE) |
| Wi-Fi Alliance | Supported |
| Certificate in China | CMIIT ID;CCC;/Certified by the Radio Regulatory Commission/Network Access License of the Ministry of Industry and Information Technology |
| Other certifications (IC/C-Tick) | RCM; BT |
| Safety regulation | EN 60950-1 |
| Environmental protection | RoHS |
| MIMO | 2x2:2Multiple-input multiple-output (MIMO). For example, 4x4:4 indicates 4SU and 4MU. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain | 2.4G:4dBi 5G:5dBi |
| Radio power (maximum) | 2.4G: 21dBm(Max) 5G: 20dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 18dBm/chain(Max) 5G : 17dBm/chain)(Max) |
| RF ports and built-in antennas | Built-in antenna, Dual bands, 2x2 MIMO |
| Device power consumption | 11.5W(not include USB and PoE out) |
| Ethernet interface | GE(RJ45, PoE In) x 1,1000base-T,10M/100M/1000M auto negotiation speed; GE(RJ45) x 4,1000base-T,10M/100M/1000M auto negotiation speed; one supports PoE out; RJ45*2, Pass-Through |
| Weight (kg) | 0.26kg |
| Dimensions (H x W x D, in mm) | 86*140*36 Note: 36=25 (outside the wall) + 11 (inside the wall) hump: 37*19*11 mm |
| LED indicator | One two-color LED indicator |
| Preferential Selection of Power Supply (DC Input/PoE Input When Both Power Supply Modes Exist) | No priorityNote: 1. Hot backup is not supported between DC and PoE inputs. 2) When the two power supply modes coexist, the DC input range must be 12 V±5%. 1. Differentiate priorities and connect to the power supply with a higher priority. 2. The input source with a higher voltage is used as the main power supply regardless of the priority. Both the input source and the input source may supply power due to the voltage difference of the power adapter, the output voltage difference of the switch, the length of the network cable, and the impedance of the network cable. 3. Hot backup is supported. The system does not restart when one of them is removed. 4. Hot backup is not supported. If one of them is removed, the device may restart. |
| DC input | 48V±5%,57V MAX, a cold end terminal |
| Power supply (input) for PoE out | The PoE out has the same input with the system Power (PoE_IN or 48V DC power supply) |
| PoE input | 802.3af/at |
AP2050DN-E Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
