AP4050DN-HD Huawei AP4000 Series Dual Band 2x2 MIMO Access Point
AP4050DN-HDAP4050DN-HD Huawei AP4000 Series Dual Band 2x2 MIMO Access Point
- 763 412 7282
- +86 010 82830816
AP4050DN-HD Overview
AP4000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.
Huawei AP4050DN-HD is a wireless access point (AP) that supports 802.11ac Wave 2, 2 x 2 MIMO, and two spatial streams. It provides comprehensive service support capabilities and features high reliability, high security, simple network deployment, automatic AC discovery and configuration and real-time management and maintenance, which meets network deployment requirements. The AP complies with 802.11n and 802.11ac protocols and can provide gigabit STA access, which greatly improves user experience on wireless networks. It has built-in smart high-density antennas and therefore provides more precise wireless coverage, applicable to indoor high-density stadiums.
The AP4050DN-HD has the following advantages:
- 2x2 MIMO
- Good service support capabilities
- High reliability
- High security
- Simple network deployment
- Automatic AC discovery and configuration
- Real-time management and maintenance
In compliance with 802.11ac Wave 2, the AP4050DN-HD can provide gigabit access for wireless users, greatly improving wireless user experience.
The AP4050DN-HD provides basic 802.11n/ac WLANs for high-density scenarios of indoor stadiums. It provides flexible distribution options in different environments and can work in hybrid mode (AP+bridge).
A cloud AP must be used together with a cloud server.
AP4050DN-HD Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Humidity | 5%~95% |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| FCC | Supported |
| CE | Supported |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Other certification (IC/C-Tick) | RCM |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 2x2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | 2.4G:13dBi 5G:10dBi |
| Radio power (Max) | 2.4G: 22dBm(Max) 5G: 22dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 19dBm/chain(Max) 5G : 19dBm/chain(Max)) |
| Radio port/built-in antenna | Built-in 30-degree antenna (lobe width), dual-band, 2*2 MIMO |
| Power consumption of the device | 11.8W (802.3af or DC , not support POE OUT) 13.9W (802.3at, not include POE OUT) |
| Ethernet ports | GE(RJ45) x 2, 1000base-T, 10M/100M/1000M auto negotiation speed; |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.5kg |
| Dimensions (W x D x H) (mm) | 334*240*65 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | No priority. Hot backup is supported.notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 12V±10%,16V MAX, 2.1mm DC JACK |
| PoE out power supply (input) | The PoE out has the same input with the system Power (PoE_IN) |
| AP PoE input | 802.3af/at (only supported by one GE port) |
AP4050DN-HD Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
