AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points

AP4030TN
Price:US $578.00
AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points
AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points

AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points

AP4030TN

Huawei AP4000 Series indoor enterprise access points supports 802.11ac, 2x2 MIMO, dual-band radios (2.4GHz/5GHz), and a maximum rate of 1.167 Gbit/s.

New Factory Sealed
US$ 578.00
mastercard paypal t-t visa
AP4030TN Huawei AP4000 Series Wi-Fi 5 2 x 2 MIMO Access Points
Engineer Team Support
7*24h Online
  • 763 412 7282
  • +86 010 82830816

AP4030TN Overview

AP4000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.

The AP4030TN supports 2 x 2 MIMO, provides comprehensive service support capabilities, and features high reliability, high security, simple network deployment, automatic AC discovery and configuration, as well as real-time management and maintenance, which meets network deployment requirements. The AP complies with the 802.11ac protocol and can provide gigabit access for wireless users, greatly improving user experience.

The AP4030TN is applicable to e-classrooms, high-density scenarios, shopping malls, and supermarkets for providing basic 802.11n/ac wireless access networks. The AP can be deployed flexibly based on site environments.

The AP4030TN provides basic 802.11n/ac wireless networks for electronic classrooms in primary/secondary education, high-density scenarios, shopping malls, and supermarkets.

The AP4030TN supports flexible radio switchover and 2.4G + dual-5G access for education and office scenarios. One of its radios can be used for processing value-added services such as WIDS, Wi-Fi terminal location, and spectrum analysis, reducing impact on Wi-Fi coverage.

The AP4030TN can be flexibly deployed and work in hybrid mode (Fit AP + bridge).


AP4030TN Specification

PoE port surge protectionPoE interface:
Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion;
Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion
Ingress protectionIP41
Atmospheric pressure53~106Kpa ETSI 300 019-2-3
Ground/floating groundFloating ground
AltitudeThe device works properly if the altitude is between -60 m and 5000 m;
If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m.
Operating temperatureOperating temperature: -10~45℃
Storage temperature: -40~70℃
Humidity5%~95%
CESupported
Wi-Fi allianceSupported
Certification of Radio Association of ChinaCMIIT ID;
Safety certificationIEC/EN/UL60950-1
Environment certificationRoHS
MIMO2x2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported.
Wi-Fi standard802.11b/g/n
802.11a/n/ac
Antenna gain (Typical)2.4G:5dBi
5G:5dBi
Radio port/built-in antennaBuilt-in omnidirectional antenna, three radios, 2x2 MIMO
Radio power (Max)2.4G: 23dBm(Max)
5G: 23dBm(Max)
(note: this is MIMO total radio power, the same as:
2.4G: 20dBm/chain(Max)
5G : 20dBm/chain(Max))
Power consumption of the device21.5W(not include USB)
Ethernet portsGE(RJ45) x 2, 1000base-T, 10M/100M/1000M auto negotiation speed;
Console portRJ45 ×1
Weight (kg)0.86kg
Dimensions (W x D x H) (mm)220*220*53
LED indicatorOne two-color LED indicator
AP Power supply priority (12 V DC/PoE)No priority.Hot backup is supported.notes:
1) Hot backup is not supported;
2) When two inputs exit, the DC input range is 12 V±5%.
1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply.
2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance.
3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted.
4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted.
DC power supply12V±10%,16V MAX, 2.1mm DC JACK
AP PoE input802.3at (only supported by one GE port)

AP4030TN Warranty

Low Price Guarantee
Customers can get high quality products at wholesale prices

Quality Assurance
All products sold are original genuine goods, new packaging unopened

100% Money Back Guarantee
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us

Commodity Refund Guarantee
For equipment purchased from us, please contact our customer service team for return and replacement services

Diversified and Flexible Transportation Services
Cargo carriers include Fedex, DHL, UPS, Aramex, TNT, EMS

Standard Policy
1 Year