AP7030DE-DC Huawei AP7000 Series 802.11ac Wave 2 3x3 MIMO AP Bundle
AP7030DE-DCAP7030DE-DC Huawei AP7000 Series 802.11ac Wave 2 3x3 MIMO AP Bundle
- 763 412 7282
- +86 010 82830816
AP7030DE-DC Overview
AP7000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.
Huawei AP7030DE-DC 802.11ac Wireless Access Point delivers high-speed, reliable WLAN services at 1.9 Gbit/s with 3 x 3 MIMO (three spatial streams) and provides redundant PoE (IEEE 802.3at-compliant) ports with DC power supply. Integrated with smart antennas deliver accurate and directional RF coverage with suppressed interference and improved signal gain and Ethernet link aggregation ensures WLAN stability.
AP7030DE-DC is a Huawei AP7000 Series 802.11ac Wave 2 3×3 MIMO Dual-band Smart Indoor Access Point Bundle (with AC/DC adapter).
AP7030DE-DC Specification
| PoE port surge protection | PoE interface:Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion;Common mode (eight pairs of cables-GND), 2/4 kV (1.2/50 us, 42 ohm), B/R criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Operating temperature | Operating temperature: -20~50℃Storage temperature: -40~70℃ |
| Humidity | 5%~95% |
| FCC | Supported |
| CE | CE(Rohs, Reach, WEEE) |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Other certification (IC/C-Tick) | IC,C-Tick |
| Safety certification | UL/CB |
| Environment certification | RoHS |
| MIMO | 3x3Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n802.11a/n/ac |
| Antenna gain (Typical) | 2.4G:5dBi5G:5dBi |
| Radio power (Max) | 2.4G: 25dBm(Max)5G: 21dBm(Max)(note: this is MIMO total radio power, the same as:2.4G: 20dBm/chain(Max)5G : 16dBm/chain)(Max) |
| Radio port/built-in antenna | 12*Built-in smart antenna, Dual-Band |
| Power consumption of the device | 19W |
| Ethernet ports | GE(RJ45) x 2, 1000base-T, 10M/100M/1000M auto negotiation speed; |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.1kg |
| Dimensions (W x D x H) (mm) | 22022053 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | 12V DC firstnotes: 1) Hot backup is not supported;2) When two inputs exit, the DC input range is 12 V±5%.1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply.2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance.3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted.4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 12V±10%,16V MAX, 2.1mm DC JACK |
| AP PoE input | 802.3at, Dual PoE+ InputNote: Hot backup cannot be guaranteed (Use Huawei PoE+ switch, hot backup can be tested but this cannot be 100% guaranteed) |
AP7030DE-DC Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
