AP7052DE Huawei AP7000 802.11ac Wave 2 4x4 MIMO Access Point
AP7052DEAP7052DE Huawei AP7000 802.11ac Wave 2 4x4 MIMO Access Point
- 763 412 7282
- +86 010 82830816
AP7052DE Overview
AP7000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.
Huawei AP7052DE is the latest-generation technology-leading wireless access point (AP). It provides secure gigabit wireless access in compliance with the 802.11ac Wave 2 standards. The AP supports 4 x 4 MIMO and four spatial streams. The AP has built-in smart antennas and supports smooth evolution from 802.11n standards to 802.11ac standards and meets the bandwidth requirements of large bandwidth services such as High Definition (HD) video streams, multimedia, and desktop cloud services, delivering smooth and high-quality wireless services to enterprise users. As the 802.11ac Wave 2 AP that provides the 5GE uplink interface, it is intelligent, secure, and easy to use. Delivering industry-leading performance in a rugged, attractive enclosure, it is ideal for enterprise office and education scenarios.
● 802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies
● 5GE uplink interface that can connect to a 100 MHz/1000 MHz/2.5 GHz interface, to improve the service load capability
● Smart antenna array technology enables targeted signal coverage for mobile terminals, reduces interferences, and improves signal quality. Additionally, it supports millisecond-level switchover as terminals move.
● Dual PoE power supply for backup
● Built-in Bluetooth to implement precise positioning with eSight
● USB interface used for external power supply and storage
● Support for the Fat, Fit, and cloud modes
● Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
AP7052DE Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Ground |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| Humidity | 5%~95% |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| CE | Supported |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Other certification (IC/C-Tick) | Bluetooth alliance |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 2.4G 4*4 + 5G 4*4,4SU,4MUMulti-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | 2.4G: 3dBi 5G: 4dBi; BT:4dBi |
| Radio power (Max) | 2.4G: 29dBm(Max) 5G: 28dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 23dBm/chain(Max) 5G : 22dBm/chain(Max)) |
| Radio port/built-in antenna | Built-in smart antenna, 2.4G+5G dual-band, 4x4 MIMO |
| Power consumption of the device | 35.7W(not include USB) |
| Ethernet ports | 1) 5GE/2.5GE(RJ45) x1,5G/2.5G/1000M/100M, auto negotiation speed; 2) GE(RJ45) x 1, 10M/100M/1000M , auto negotiation speed; |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.75kg |
| Dimensions (W x D x H) (mm) | 220*220*74.5 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | No priority. DC and GE/PoE_IN support hot backup.notes: 1) Hot backup is not supported;2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 42.5V~57V |
| AP PoE input | Dual PoE IN ,supporting 802.3at/203.3bt(draft) 1) In case equal input is MIMO(both bt or at),hot backup is supported.AP making decisions according to the higher input.which is active or standby is not distinguished,maybe both inputs are supplying the AP simultaneously. 2)In case unequal input,no hot backup is supported.AP making decisions according to the higher input.which is active or standby is not distinguished,maybe both inputs are supplying the AP simultaneously. |
AP7052DE Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
