AP7052DN Huawei AP7000 Series 802.11ac Wave2 Indoor 4X4 Dual-Band AP
AP7052DNAP7052DN Huawei AP7000 Series 802.11ac Wave2 Indoor 4X4 Dual-Band AP
- 763 412 7282
- +86 010 82830816
AP7052DN Overview
AP7000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.
Huawei AP7052DN are the latest-generation technology-leading wireless access points (APs). They provide secure gigabit wireless access in compliance with the 802.11ac Wave 2 standards. The APs support 4 x 4 MIMO, four spatial streams, and 2.4G-to-5G switchover. The APs have built-in omnidirectional antennas and support smooth evolution from 802.11n standards to 802.11ac standards. They meet the bandwidth requirements of large-bandwidth services such as High Definition (HD) video streams, multimedia, and desktop cloud services, delivering smooth and high-quality wireless services to enterprise users. As 802.11ac Wave 2 APs that provide the 5GE uplink interface, they are intelligent, secure, and easy to use. Delivering industry-leading performance in a rugged, attractive enclosure, the two AP models are ideal for enterprise office and education scenarios.
● 802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies
● 2.4G-to-5G switchover
● 5GE uplink interface that can connect to a 100 MHz/1000 MHz/2.5 GHz interface, to improve the service load capability
● Dual PoE power supply for backup
● Built-in Bluetooth to implement precise positioning with eSight
● USB interface used for external power supply and storage
● IoT slot to allow for flexible expansion of IoT applications
● Support for the Fat, Fit, and cloud modes
● Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
AP7052DN Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Operating temperature | Operating temperature: -10~50℃Storage temperature: -40~70℃ |
| Humidity | 5%~95% |
| FCC | FCC |
| CE | Supported |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 2.4G/5G 44 + 5G 44,4MU,Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | 2.4G:2dBi5G-0(switching):2.8dBi;5G-1 (no switching):2.8dBi;BT:4dBi;IoT:4dBi |
| Radio port/built-in antenna | Built-in omnidirectional antenna, 2.4G+5G dual-band or dual 5G, 4x4 MIMO |
| Radio power (Max) | 2.4G: 26dBm(Max) 5G-0(Switching channel): 21dBm(Max) 5G-1: 24dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G-0 : 15dBm/chain(Max) 5G-1 : 18dBm/chain(Max)) |
| Power consumption of the device | 33W(not include USB) |
| IoT slot | 1 Slot (UART interface signals) |
| Ethernet ports | 1) 5GE/2.5GE(RJ45) x1,5G/2.5G/1000M/100M, auto negotiation speed; 2) GE(RJ45) x 1, 10M/100M/1000M , auto negotiation speed; |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.68kg |
| Dimensions (W x D x H) (mm) | 22022052 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | No priority. DC and GE/PoE_IN support hot backup.notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 42.5V~57V |
| AP PoE input | Dual PoE IN ,supporting 802.3at/203.3bt(draft) 1) In case equal input is MIMO(both bt or at),hot backup is supported.But which is active or standby is not distinguished,maybe both inputs are supplying the AP simultaneously. 2)In case unequal input,no hot backup is supported.AP making decisions according to the higher input.which is active or standby is not distinguished,maybe both inputs are supplying the AP simultaneously. |
AP7052DN Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
