AP7060DN Huawei AP7000 Series 802.11ax 2.4G 4x4 + 5G 8x8 Dual Bands AP
AP7060DNAP7060DN Huawei AP7000 Series 802.11ax 2.4G 4x4 + 5G 8x8 Dual Bands AP
- 763 412 7282
- +86 010 82830816
AP7060DN Overview
AP7000 series access points (APs) are Huawei's high-performance Wi-Fi 5 APs, suitable for indoor coverage scenarios such as enterprise office, education, and commercial scenarios.
Huawei AP7060DN is a cutting-edge 802.11ax wireless access point (AP) with built-in omnidirectional antennas. On the 2.4 GHz band, the AP7060DN supports 4x4 MIMO and four spatial streams. On the 5 GHz band, the AP7060DN supports 8x8 MIMO and eight spatial streams. With its 10GE uplink port, the AP7060DN can easily eliminate the bottleneck in upstream bandwidth of common APs. The AP7060DN supports high-bandwidth services such as VR/AR interactive teaching, HD video streaming, multimedia, and desktop cloud, and provides high-quality wireless services for enterprises.
The AP7060DN provides only a single indicator.
AP7060DN Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Humidity | 5%~95% |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| CE | CE(Rohs, Reach, WEEE) |
| FCC | FCC/NRTL |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 2.4G:4x4 5G:8x8Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n802.11a/n/ac/ac wave2/11ax |
| Antenna gain (Typical) | 2.4GHz: 4.6dBi 5GHz: 5.6dBi Note: 1. The gains above are the single-antenna peak gains. 2. The equivalent antenna gain after all 2.4 GHz or 5 GHz antennas are combined is 4 dBi in 2.4 GHz or 2 dBi in 5 GHz. |
| Radio power (Max) | 2.4G: 24dBm(Max) 5G: 27dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 18dBm/chain(Max) 5G : 18dBm/chain(Max)) |
| Radio port/built-in antenna | Built-in omnidirectional antenna, dual-band MIMO, 2.4G 4*4+5G 8*8 |
| Power consumption of the device | 30.0W(not include USB and IoT) |
| IoT slot | Support 1 IOT expansion module |
| Ethernet ports | GE(RJ45)x1, 10M/100M/1000M auto 10GE(RJ45)x1, 100M/1GE/2.5GE/5GE/10GE auto |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.8kg |
| Dimensions (W x D x H) (mm) | 22022057 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | Hot backup is not supported. Not distinguished by priority:notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 42.5V~57V |
| AP PoE input | 802.3at/at (Only 10GE interface supported) |
AP7060DN Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
