JY693A Aruba AP-203H (RW) Flex-radio 802.11ac 2 x 2 Access Point
JY693AJY693A Aruba AP-203H (RW) Flex-radio 802.11ac 2 x 2 Access Point
- 763 412 7282
- +86 010 82830816
JY693A Overview
This cost-effective IEEE 802.11ac Access Point (AP) with single or dual radio mode delivers high performance Wi-Fi networks for hospitality and branch offices, while minimizing costs for low to moderate density areas. The compact Aruba 203H Unified Hospitality Access Point is software configurable to operate in either 1 x 1 dual radio mode, or 2 x 2 single radio mode.
It supports up to 867 Mb/s in the 5 GHz band or up to 400 Mb/s in the
2.4 GHz band in single radio 2 x 2 mode. In dual radio 1 x 1 mode, the
maximum data rates for the 203H AP are up to 433 Mb/s in the 5 GHz band
and 200 Mb/s in the 2.4 GHz band. Powered by PoE, the 203H AP minimizes
power consumption with rich features that further facilitates a highly
efficient and reliable wireless network. The 802.11ac 203H AP combines
wireless and wired access in a single compact device. The local GbE port can
securely attach wired devices to user network.
JY693A is one of the HPE Aruba AP-203H (RW) Flex-radio 802.11ac 2 x 2 Unified Hospitality Access Point (AP) with internal antennas
JY693A Specification
| System Specifications | ||
| Encrypted throughput | Maximum IPsec encrypted wired throughput: 20 Mb/s |
|
| 203H Access Point (AP) specifications | Unified flexible radio 802.11ac 2 x 2:2SS hospitality and branch AP with internal antennas Supports wall-box and desk mount deployments |
|
| WIFI Radio specifications | AP Type: Indoor flexible radio: 5 GHz 802.11ac 2 x 2 MIMO or 2.4 GHz 802.11n 2 x 2 MIMO1 5 GHz 802.11ac 1 x 1 and 2.4 GHz 802.11n 1 x 11 Software-configurable radio supports 5 GHz (Radio 0) and/or 2.4 GHz (Radio 1) 5 GHz: Two spatial stream Single User (SU) MIMO for up to 867 Mb/s wireless data rate to individual 2 x 2 VHT80 client devices 2.4 GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mb/s wireless data rate to individual 2 x 2 VHT40 client devices (300 Mb/s for HT40 802.11n client devices) Support for up to 32 associated client devices per radio, and up to 8 BSSIDs per radio Supported frequency bands (Country-specific restrictions apply): 2.400 to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent on configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spreadspectrum (DSSS) 802.11a/g/n/ac: Orthogona l frequencydivision multiplexing (OFDM) Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of Maximum (Conducted) transmit power (Limited by local regulatory requirements): 2.4GHz Band: +18 dBm per chain, +21 dBm aggregate (2 x 2 Mode) 5GHz Band: +16 dBm per chain, +19 dBm aggregate (2 x 2 Mode) Maximum ratio combining (MRC) for improved receiver performance Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance Short guard interval for 20 MHz, 40 MHz and 80 MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for highefficiency error correction and increased throughput Transmit beam-forming (T x BF) for increased signal reliability and range (2 x 2 Mode) Supported data rates (Mb/s): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS= 1 to 2 for VHT20/40/80) 802.11n High Throughput (HT) support: HT 20/40 802.11ac Very High Throughput (VHT) support: VHT 20/40/80 802.11n/ac Packet aggregation: AMPDU, A-MSDU |
|
| Physical Specifications | ||
| Dimensions | - Unit, including single-gang wall box mount plate: 140 x 86 x 26.5 mm (5.51 x 3.38 x 1.04 in) - Shipping: 165 x 115 x 47 mm (6.49 x 4.52 x 1.85 in) |
|
| Weight | - Unit, including single-gang wall box mount plate: 225 g (0.49 lb) - Shipping: 290 g (0.64 lb) |
|
| Electrical Specifications | ||
| POE | 48 V dc (Nominal) 802.3af/802.3 at compliant source | |
| Maximum (Worst-Case) power consumption | 7.4 W | |
| Maximum (Worst-Case) power consumption in idle mode | 3.9 W | |
| Environmental Specifications | ||
| Operating temperature | 0° to +40°C (+32° to +104°F) | |
| Operating humidity | 5% to 93% Non-condensing | |
| Storage and transportation temperature | -40° to +70°C (-40° to +158°F) | |
| Safety and Regulatory Certifications | ||
| Certifications | CB Scheme Safety, cTUVus UL2043 plenum rating Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac |
|
| Regulatory | FCC/Industry of Canada CE Marked R&TTE Directive 1995/5/EC Low Voltage Directive 72/23/EEC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1 and EN 60601-1-2 |
|
| Reliability | MTBF: 780,000 hours (89 years) at +25°C operating temperature | |
| RF Performance table | ||
| Specifications | Maximum transmit power (dBm) per transmit chain | Receiver sensitivity (dBm) per receive chain |
| 802.11b 2.4 GHz | ||
| 1 Mb/s | 18 | -92 |
| 11 Mb/s | 18 | -88 |
| 802.11g 2.4 GHz | ||
| 6 Mb/s | 18 | -88 |
| 54 Mb/s | 18 | -73 |
| 802.11n HT20 2.4 GHz | ||
| MCS0/8 | 17 | -88 |
| MCS7/15 | 17 | |
| 802.11a 5 GHz | ||
| 6 Mb/s | 17 | -85 |
| 54 Mb/s | 17 | -68 |
| 802.11n HT20 5 GHz | ||
| MCS0/8 | 16 | -88 |
| MCS7/15 | 16 | -72 |
| 802.11n HT40 5 GHz | ||
| MCS0/8 | 16 | -88 |
| MCS7/15 | 15 | -70 |
| 802.11ac VHT20 5 GHzb | ||
| MCS0 | 16 | -88 |
| MCS8 | 15 | -65 |
| 802.11ac VHT40 5 GHz | ||
| MCS0 | 16 | -85 |
| MCS9 | 13 | -62 |
| 802.11ac VHT80 5 GHz | ||
| MCS0 | 16 | -82 |
| MCS9 | 13 | -59 |
JY693A Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
