JX952A HPE Aruba AP-207 802.11n/ac 2 x 2:2 Dual Radio Access Points
JX952AJX952A HPE Aruba AP-207 802.11n/ac 2 x 2:2 Dual Radio Access Points
- 763 412 7282
- +86 010 82830816
JX952A Overview
JX952A is the Aruba AP-207 802.11n/ac 2x2:2 Dual Radio Integrated Antenna AP.
The affordable mid-range Aruba 207 Series access point delivers high performance 802.11ac for medium density enterprise environments. With the integrated BLE and supporting 802.3af power, the Aruba 207 Series AP enables enterprises to improve their work efficiency and productivity with the lowest TCO.
The compact Aruba 207 Series AP delivers a maximum concurrent data rate of 867 Mbps in the 5GHz band and 400 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.3Gbps). Featuring 2x2:2SS, and increased
operating temperature, the 207 AP is designed for medium device density environments, such as schools, retail branches, warehouses, hotels and enterprise offices, where the environment is cost sensitive.
With the integrated Bluetooth Aruba Beacon, the 207 Series provides advanced location and indoor wayfinding, and proximity-based push notification services while simplifying the remote management of battery-powered Aruba Beacons. It enables businesses to leverage mobility context to develop applications that will deliver an enhanced user experience and increase the value of the wireless network for organizations.
JX952A Specification
| JX952A | Aruba AP-207 802.11n/ac 2 x 2:2 dual radio integrated antenna AP | |
| Band, Rate | Maximum transmit power (dBm) per transmit chain | Receiver sensitivity (dBm) per receive chain |
| 802.11b 2.4GHz | ||
| 1 Mbps | 18 | -90 |
| 11 Mbps | 18 | -90 |
| 802.11g 2.4GHz | ||
| 6 Mbps | 18 | -90 |
| 54 Mbps | 18 | -75 |
| 802.11n HT20 2.4GHz | ||
| MCS0/8 | 18 | -90 |
| MCS7/15 | 18 | -71 |
| 802.11n HT40 2.4GHz | ||
| MCS0/8 | 18 | -87 |
| MCS7/15 | 18 | -68 |
| 802.11a 5GHz | ||
| 6 Mbps | 18 | -90 |
| 54 Mbps | 17.5 | -75 |
| 802.11n HT20 5GHz | ||
| MCS0/8 | 18 | -91 |
| MCS7/15 | 17 | -71 |
| 802.11n HT40 5GHz | ||
| MCS0/8 | 18 | -87 |
| MCS7/15 | 17 | -68 |
| 802.11ac VHT20 5GHz (SU-MIMO) | ||
| MCS0 | 18 | -90 |
| MCS8 | 16 | -67 |
| 802.11ac VHT40 5GHz (SU-MIMO) | ||
| MCS0 | 18 | -87 |
| MCS9 | 15 | -62 |
| 802.11ac VHT80 5GHz (SU-MIMO) | ||
| MCS0 | 18 | -84 |
| MCS9 | 15 | -59 |
| AP type | Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO | |
| Radio Configuration | Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1) | |
| 5GHz Data Rate | Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2x2 VHT80 client devices | |
| 2.4GHz Data Rate | Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2x2 VHT40 client devices (300Mbps for HT40 802.11n client devices) | |
| Client & BSSID Support | Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio | |
| Supported frequency bands (country-specific restrictions apply) | - 2.400 to 2.4835GHz - 5.150 to 5.250GHz - 5.250 to 5.350GHz - 5.470 to 5.725GHz - 5.725 to 5.850GHz |
|
| Available channels | Dependent on configured regulatory domain | |
| Dynamic frequency selection (DFS) | Optimizes the use of available RF spectrum | |
| Supported radio technologies | - 802.11b: Direct-sequence spread-spectrum (DSSS) | |
| - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) | ||
| Supported modulation types | - 802.11b: BPSK, QPSK, CCK | |
| - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM | ||
| Transmit power adjustment | Configurable in increments of 0.5 dBm | |
| Maximum (conducted) transmit power (limited by local regulatory requirements) | - 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) - 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) NOTE: Conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain |
|
| Advanced Cellular Coexistence (ACC) | Minimizes interference from cellular networks | |
| Maximum ratio combining (MRC) | For improved receiver performance | |
| Cyclic delay/shift diversity (CDD/CSD) | For improved downlink RF performance | |
| Short guard interval for 20MHz, 40MHz and 80MHz channels | Short guard interval support for 20MHz, 40MHz and 80MHz channels | |
| Space-time block coding (STBC) | For increased range and improved reception | |
| Low-density parity check (LDPC) | For high-efficiency error correction and increased throughput | |
| Transmit beam-forming (TxBF) | For increased signal reliability and range | |
| Supported data rates (Mbps) | - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 300 (MCS0 to MCS15) - 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80 |
|
| 802.11n high-throughput (HT) support | HT 20/40 | |
| 802.11ac very high throughput (VHT) support | VHT 20/40/80 | |
| 802.11n/ac packet aggregation | A-MPDU, A-MSDU | |
| AP-207/IAP-207 Antenna Configuration | Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO | |
| Antenna Gain | Maximum antenna gain of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz | |
| Antenna Optimization | Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees | |
| Combined Antenna Patterns Gain | The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 5.2dBi in 2.4GHz and 7.5dBi in 5GHz | |
| Ethernet network interface | One 10/100/1000BASE-T (RJ-45) - Auto-sensing link speed and MDI/MDX - 802.3az Energy Efficient Ethernet (EEE) |
|
| Bluetooth Low Energy (BLE) radio | - Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity - Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.2dBi |
|
| Visual indicators (multi-color LEDs) | For System and Radio status | |
| Reset button | Factory reset (during device power up) | |
| Serial console interface | Proprietary; optional adapter cable available | |
| Kensington security slot | - | |
| Power support | The AP supports direct DC power and Power over Ethernet (POE) | |
| Power priority | When both power sources are available, DC power takes priority over POE | |
| Power sources note | Power sources are sold separately | |
| Direct DC source | 12Vdc nominal, +/- 5% - Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length |
|
| Power over Ethernet (POE) | 48 Vdc (nominal) 802.3af/802.3at compliant source - Unrestricted functionality with 802.3af POE |
|
| Maximum (worst-case) power consumption | 12.3W (POE) or 10.1W (DC) | |
| Maximum (worst-case) power consumption in idle mode | 5.3W (POE) or 4.4W (DC) | |
| Operating Temperature | 0° C to +50° C (+32° F to +122° F) | |
| Operating Humidity | 5% to 95% non-condensing | |
| Storage and transportation Temperature | -40° C to +70° C (-40° F to +158° F) | |
| Regulatory compliance | - FCC/Industry of Canada - CE Marked - R&TTE Directive 1995/5/EC - Low Voltage Directive 72/23/EEC - EN 300 328 - EN 301 489 - EN 301 893 - UL/IEC/EN 60950 - EN 60601-1-1 and EN 60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative |
|
| Additional certifications | - CB Scheme Safety, cTUVus - UL2043 plenum rating - Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac |
|
| Warranty | Aruba Limited lifetime warranty | |
| Supported software | - ArubaOS 6.5.1.0 - Aruba InstantOS 4.3.1.0 |
|
JX952A Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
Firmware Download
