AP6750-10T Huawei AP6000 Series Indoor 802.11ac Wave 2 Triple-radio AP
AP6750-10TAP6750-10T Huawei AP6000 Series Indoor 802.11ac Wave 2 Triple-radio AP
- 763 412 7282
- +86 010 82830816
AP6750-10T Overview
Huawei AP6750-10T is an 802.11ac Wave 2 — Wi-Fi 5 — Access Point (AP) with built-in adaptive array antennas, referred to as Smart Antennas, providing precise coverage and improved signal quality. Combined with lightning-fast speeds of up to 3 Gbit/s, the AP is designed for high-density scenarios such as e-classrooms and supermarkets.
To support a high number of concurrent users, AP6750-10T features triple radio channels: a single 2.4 GHz channel and two 5 GHz channels. The 2.4 GHz channel and one of the 5 GHz channels support 2 x 2 Multiple-Input Multiple-Output (MIMO) and two spatial streams each; the remaining 5 GHz channel supports 4 x 4 MIMO and four spatial streams.
The AP6750-10T has the following advantages:
- 2.4G 2x2 MIMO + 5G 2x2 MIMO+ 5G 4x4 MIMO
- Good service support capabilities
- High reliability
- High security
- Simple network deployment
- Automatic AC discovery and configuration
- Real-time management and maintenance
In compliance with 802.11ac, the AP6750-10T can provide gigabit access for wireless users, greatly improving wireless user experience. Additionally, the AP6750-10T supports Bluetooth location with the built-in Bluetooth module
The AP6750-10T provide basic 802.11n/ac access through 2.4G + 5G for electronic classrooms in elementary education, high-density scenarios, shopping malls, and supermarkets. The AP6750-10T can be flexibly deployed in different environments and can work in hybrid mode (AP + bridge).
A cloud AP must be used together with a cloud server.
AP6750-10T Specification
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Floating ground |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| Humidity | 5%~95% |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| CE | CE(Rohs, Reach, WEEE) |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Other certification (IC/C-Tick) | Bluetooth alliance |
| Safety certification | IEC/EN/UL62368-1 |
| Environment certification | RoHS |
| MIMO | 2.4G:2x25G:2x25G:4x4Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | Maximum gain per antenna: 2.4G: 3.5dBi 5G：5dbi Note: Combined antenna gain: 2.4G: 1dBi 5G1: 2dBi 5G2: 3dBi |
| Radio port/built-in antenna | Built-in smart antenna, Triple radios, 2.4G 2*2+5G 2*2+5G 4*4,MIMO |
| Radio power (Max) | 2.4G: 23dBm(Max) 5G1: 24dBm(Max) 5G2: 27dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G1: 21dBm/chain(Max) 5G2: 21dBm/chain(Max)) |
| Power consumption of the device | 19.3W(not include USB) |
| IoT slot | USB expansion |
| Ethernet ports | GE(RJ45)*2, 10M/100M/1000M auto |
| other interfaces | USB 2.0 USB port/micro SD/Mini USB... |
| Weight (kg) | 1.2kg |
| Dimensions (W x D x H) (mm) | 220*220*47 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | Hot backup is not supported.notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 12V±10%, 2.1mm DC JACK |
| AP PoE input | 802.3at (only supported by one GE port) |
AP6750-10T Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
