Huawei AP6150DN is the latest-generation wireless access points (APs) that comply with the 802.11ac Wave 2 standard and provide gigabit bandwidth for wireless networks. They support 4×4 MIMO and four spatial streams and provide a peak rate of 2.53 Gbit/s. The APs support smooth evolution from 802.11n to 802.11ac and meet the bandwidth requirements of largebandwidth services such as High Definition (HD) video streams, multimedia, and desktop cloud services, delivering smooth and high-quality wireless services to enterprise users. The AP6050DN and AP6150DN apply to high-density scenarios of medium or large size, such as mobile offices general education, and higher education.
● 802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies, peak rate of 800 Mbit/s at 2.4 GHz and 1.73 Gbit/s at 5 GHz, and 2.53 Gbit/s for the device
● Dual Ethernet interfaces supporting link aggregation and ìàffic load balancing while ensuring link reliability
● USB interface used for external power supply and storage
● Support for the Fat, Fit, and cloud modes
● Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
| PoE port surge protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection | IP41 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/floating ground | Ground |
| Operating temperature | Operating temperature: -10~50℃ Storage temperature: -40~70℃ |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Humidity | 5%~95% |
| FCC | Supported |
| CE | Supported |
| Wi-Fi alliance | Supported |
| Certification of Radio Association of China | CMIIT ID; |
| Safety certification | IEC/EN/UL60950-1 |
| Environment certification | RoHS |
| MIMO | 4x4:4Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain (Typical) | External antenna (Default gain: (2.4G: 3.5 dBi 5G: 4 dBi) (Range 2.4G&5G: 0~30)) |
| Radio power (Max) | 2.4G: 26dBm(Max) 5G: 26dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G : 20dBm/chain(Max)) |
| Radio port/built-in antenna | External antenna, 4*RP-SMA (female) (2.4G/5G combined) |
| Power consumption of the device | 22.9W(not include USB) |
| Ethernet ports | GE(RJ45) x 2, 1000base-T, 10M/100M/1000M auto negotiation speed; |
| Console port | RJ45 ×1 |
| Weight (kg) | 1.3kg |
| Dimensions (W x D x H) (mm) | 220*220*56 |
| LED indicator | One two-color LED indicator |
| AP Power supply priority (12 V DC/PoE) | No priority Hot backup is supported.notes: 1) Hot backup is not supported; 2) When two inputs exit, the DC input range is 12 V±5%. 1. Distinguished by priority: If AC/DC and PoE are both used, the one with higher priority provides power supply. 2. Not distinguished by priority: Higher input voltage serves as the primary power supply. Scenarios where both AC/DC and PoE provide power supply may exist, which is influenced by the difference of power supply voltage and switch PSE output voltage, cable length, and cable impedance. 3. Hot standby supported: For AC/DC and PoE power supplies, if one is removed, the other will not be restarted. 4. Hot standby not supported: For AC/DC and PoE power supplies, if one is removed, the other may be restarted. |
| DC power supply | 12V±10%, 2.1mm DC JACK |
| AP PoE input | 802.3at (only supported by one GE port) |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |