C1-N5672UP-4FEX-1G - Cisco ONE N5672UP Chassis
C1-N5672UP-4FEX-1GC1-N5672UP-4FEX-1G - Cisco ONE N5672UP Chassis
- 763 412 7282
- +86 010 82830816
C1-N5672UP-4FEX-1G Overview
The Cisco C1-N5672UP-4FEX-1G is a high-performance switch for data centers and enterprise networks. It features 48x 10GB SFP+ ports, with 24 of them being uplink ports, and 6x 40GB QSFP+ B-F Air Switches.With a switching capacity of 1.44 Tbps (terabits per second) and a forwarding rate of 1071 Mpps (million packets per second), this switch offers fast and efficient data transmission. The MAC address table size is impressive at up to 256,000 entries.One standout feature of the C1-N5672UP-4FEX-1G is its low latency capability - providing only a one-microsecond delay in processing network traffic.
C1-N5672UP-4FEX-1G Specification
| C1-N5672UP-4FEX-1G | |
| Product list | |
| Product code | C1-N5672UP-4FEX-1G |
| Device Type | Switch - 48 ports - L3 - managed - with 4 x Cisco Nexus 2248TP-E GE Fabric Extender |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Product parameters | |
| Port | 32 x 1 Gigabit / 10 Gigabit SFP+ + 16 x combo 1 Gigabit / 10Gb Ethernet / 2/4/8Gb Fibre Channel / FCoE SFP+ + 6 x 40Gb Ethernet / FCoE QSFP+ (breakout compatible) |
| Interfaces | 48 x SFP+ ¦ 6 x QSFP+ ¦ 1 x console RJ-45 management ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x USB |
| Features | Routing, layer 3 switching, DHCP support, VPN support, ARP support, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, SSH support, Jumbo Frames support, Dynamic ARP Inspection (DAI), front to back airflow, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, Unicast Reverse Path Forwarding (URPF), IPv4 support, Link Aggregation Control Protocol (LACP), Per-VLAN Rapid Spanning Tree (PVRST), Hot Standby Router Protocol (HSRP) support, Management Information Base (MIB), Multicast VLAN Registration (MVR), Virtual Routing and Forwarding (VRF), redundant hot swappable fans, static routing, Transparent (N_Port ID Virtualization - NPIV) mode support, Registered State Change Notification (RSCN) support, Call Home function support, FCoE forwarding, STP PortFast, Class of Service (CoS), Multicast Source Discovery Protocol (MSDP), SNMP support, Virtual PortChannel (vPC) technology |
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz, FIP v1 |
| Introduction | The Cisco Nexus 5672UP is a wire-rate Layer 2 and Layer 3 switch offering 10 Gigabit Ethernet and unified ports (UP) in a compact one-rack-unit form factor. It is optimized for 10 Gigabit Ethernet top-of-rack access, Cisco Fabric Extender (FEX) aggregation, Virtual Extensible LAN (VXLAN) segmentation, and LAN-SAN convergence. It delivers high performance, operational efficiency, and design flexibility for traditional, virtualized, and cloud environments. |
| Power Device | |
| Power Device | Internal power supply - hot-plug |
| Power Provided | 1100W |
| Input Voltage | AC 120/230 V (50/60 Hz) |
| Physical specifications | |
| Width | 17.3 in |
| Height | 1.7 in |
| Depth | 30 in |
| Weight | 32 lbs |
| Environmental Parameters | |
| Min Temperature | 32 °F |
| Max Temperature | 104 °F |
| Humidity Operating | 10 - 85% (non-condensing) |
C1-N5672UP-4FEX-1G Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | Free CCIE Expert Technical Support |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
