The NEW Cisco C1-N3K-C3048TP is a high-performance switch designed for data centers and enterprise networks. Its 48x 1GB RJ45 ports and 4x10GB SFP+ uplink ports offer fast and reliable connectivity options.Featuring a switching capacity of 176 Gbps, this switch allows for seamless traffic flow within your network. It also boasts an impressive forwarding rate of 132 Mpps, ensuring quick data transfer between devices.With a MAC address table size of up to 128,000 entries, the C1-N3K-C3048TP supports large-scale deployments without reducing performance or efficiency.
Description |
Specification |
|
|
Physical |
- 1RU fixed form-factor switch - 48 10/100/1000-Mbps RJ-45 ports - 4 1/10 Gbps SFP+ uplink ports - 2 redundant power supplies - 1 fan tray with redundant fans - 1 I/O module with management, console, and USB flash memory ports |
|
|
Performance |
- 176-Gbps switching capacity - Forwarding rate of 132 mpps - Line-rate traffic throughput (both Layer 2 and 3) on all ports - Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames) |
|
|
Hardware tables and scalability |
MAC addresses |
128,000 |
|
Number of VLANS |
4096 |
|
|
Spanning-tree instances |
- RSTP: 512 - MSTP: 64 |
|
|
ACL entries |
2000 ingress 1000 egress |
|
|
Routing table |
16,000 prefixes and 16,000 host entries* 8000 multicast routes* |
|
|
Number of EtherChannels |
52 (with vPC) |
|
|
Number of ports per EtherChannel |
16 |
|
|
Buffers |
9 MB shared |
|
|
Boot flash memory |
2 GB |
|
|
Power |
Number of power supplies |
|
|
|
Typical operating power |
120 watts (W) (48p of 1G and 4p of 10G/SR at 100% load, with 2 power supply units [PSUs]) |
|
|
Maximum power |
124W |
|
|
AC PSUs Input voltage Frequency Efficiency |
100 to 240 VAC 50 to 60 Hz 89 to 91% at 220V |
|
|
DC PSUs Input voltage Maximum current Efficiency |
-40 to -72 VDC 33A 85 to 88% |
|
|
Typical heat dissipation |
409 BTU/hr (48p of 1G and 4p of 10G/SR at 100% load, with 2 PSUs) |
|
|
Maximum heat dissipation |
423 BTU/hr |
|
Cooling |
Forward and reversed airflow schemes Forward airflow: Port-side exhaust (air enters through fan-tray and power supplies and exits through ports) Reversed airflow: Port-side intake (air enters through ports and exits through fan tray and power supplies) Single fan tray with redundant fans Hot swappable (must swap within 1 minute) |
|
|
Sound |
Measured sound power (maximum) Fan speed: 40% duty cycle Fan speed: 60% duty cycle Fan speed: 100% duty cycle |
63.9 dBA 64.7 dBA 66.4 dBA |
|
Environment |
Dimensions (height x width x depth) |
1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 50.5 cm) |
|
Weight |
20.5 lb (9.3 kg) |
|
|
Operating temperature |
32 to 104°F (0 to 40°C) |
|
|
Storage temperature |
-40 to 158°F (-40 to 70°C) |
|
|
Operating relative humidity |
10 to 85% noncondensing Up to 5 days at maximum (85%) humidity Recommend ASHRAE data center environment |
|
|
Storage relative humidity |
5 to 95% noncondensing |
|
|
Altitude |
0 to 10,000 ft (0 to 3000m) | |
Low Price Guarantee | ![]() | Quality Assurance | |
![]() | Free CCIE Expert Technical Support | Commodity Refund Guarantee | |
Diversified and Flexible Transportation Services | ![]() | Standard Policy |