The Cisco C1-N3K-C3172TQ-XL switch offers 48x 10GB copper ports and 6x40GB QSFP+ air flow for efficient cooling. With a switching capacity of 1.4 Tbps and a forwarding rate of 1.0 Bpps, this switch can handle high data loads with ease.The MAC address table size is an impressive 288,000 entries, providing ample space for network devices to communicate effectively. This Cisco switch is designed to meet the demands of modern networking environments, ensuring reliable connectivity and smooth operation. Whether used in enterprise or data center settings, the C1-N3K-C3172TQ-XL provides robust performance and scalability for growing networks.
Description |
Specification |
|
|
Physical |
- 1RU fixed form factor ◦ 48 RJ-45 ports support 100 Mbps, 1 Gbps, and 10 Gbps ◦ 6 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each |
|
|
Performance |
- 1.4-Tbps switching capacity - Forwarding rate of up to 1 bpps - Line-rate traffic throughput (both Layer 2 and 3) on all ports - Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames) |
|
|
Hardware tables and scalability |
Number of MAC addresses |
288,000 |
|
Number of VLANS |
4096 |
|
|
Number of spanning-tree instances |
- RSTP: 512 - MSTP: 64 |
|
|
Number of ACL entries |
- 4000 ingress - 1000 egress |
|
|
Routing table |
- 16,000 prefixes and 16,000 host entries* - 8000 multicast routes* |
|
|
Number of EtherChannels |
64 (with vPC) |
|
|
Number of ports per EtherChannel |
32 |
|
|
System memory |
8 GB |
|
|
Buffer size |
12 MB shared |
|
|
Boot flash |
16 GB |
|
|
Power |
Number of power supplies |
2 |
|
Typical operating power |
360 W |
|
|
Maximum power |
440W |
|
|
AC PSUs - Input voltage - Frequency - Efficiency |
- 100 to 240 VAC - 50 to 60 Hz - 89 to 91% at 220V |
|
|
DC PSUs - Input voltage - Maximum current (PSU output – System input) - Efficiency |
- –40 to –72 VDC - 33A (400W unit), 42A (500W unit) - 85 to 88% |
|
|
Typical heat dissipation |
1228 BTU/hr |
|
|
Maximum heat dissipation |
1501 BTU/hr |
|
|
Cooling |
- Forward and reversed airflow schemes: ◦ Forward airflow: Port-side exhaust (air enters through fan-tray and power supplies and exits through ports) ◦ Reversed airflow: Port-side intake (air enters through ports and exits through fan-tray and power supplies) - Redundant fans - Hot swappable (must swap within 1 minute) |
|
|
Sound |
Measured sound power (maximum) - Fan speed: 40% duty cycle - Fan speed: 70% duty cycle - Fan speed: 100% duty cycle |
- 64.9 dBA - 69.3 dBA - 76.7 dBA |
|
Environment |
Dimensions |
1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 50.5 cm) |
|
Weight |
22.0 lb (10 kg) |
|
|
Operating temperature |
- 32 to 104°F (0 to 40°C) |
|
|
Storage temperature |
- -40 to 158°F (-40 to 70°C) |
|
|
Operating relative humidity |
- 10 to 85% noncondensing - Up to 5 days at maximum (85%) humidity - Recommend ASHRAE data center environment |
|
|
Storage relative humidity |
- 5 to 95% noncondensing |
|
|
Altitude |
- 0 to 10,000 ft (0 to 3000m) | |
Low Price Guarantee | ![]() | Quality Assurance | |
![]() | Free CCIE Expert Technical Support | Commodity Refund Guarantee | |
Diversified and Flexible Transportation Services | ![]() | Standard Policy |