The Cisco C1-N3K-C3172PQ-10GE switch features 48x 10GB SFP+ ports and 6x 40GB QSFP+ interfaces, providing a switching capacity of up to1.4 Tbps with a forwarding rate of up to 1 Bpps. The Back-to-Front Airflow design ensures efficient cooling for optimal device operation.The MAC Address Table Size is capable of handling 288,000 entries while offering low-latency performance thanks to its 4 GB system memory. This high-performance switch is designed for demanding networking environments where speed and reliability are essential components in managing network traffic effectively.
Description |
Specification |
|
|
Physical |
- 1RU fixed form factor ◦ 48 SFP ports support 1 and 10 Gigabit Ethernet ◦ 6 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each |
|
|
Performance |
- 1.4-Tbps switching capacity - Forwarding rate of up to 1 bpps - Line-rate traffic throughput (both Layer 2 and 3) on all ports - Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames) |
|
|
Hardware tables and scalability |
Number of MAC addresses |
288,000 |
|
Number of VLANS |
4096 |
|
|
Number of spanning-tree instances |
- RSTP: 512 - MSTP: 64 |
|
|
Number of ACL entries |
- 4000 ingress - 1000 egress |
|
|
Routing table |
- 16,000 prefixes and 16,000 host entries* - 8000 multicast routes* |
|
|
Number of EtherChannels |
64 (with vPC) |
|
|
Number of ports per EtherChannel |
32 |
|
|
System memory |
4 GB (3172PQ, 3172TQ, and 3172TQ-32T) |
|
|
Buffer size |
12 MB shared |
|
|
Boot flash |
2 GB (3172PQ, 3172TQ, and 3172TQ-32T) |
|
|
Power |
Number of power supplies |
2 |
|
Typical operating power |
143 W |
|
|
Maximum power |
293W |
|
|
AC PSUs - Input voltage - Frequency - Efficiency |
- 100 to 240 VAC - 50 to 60 Hz - 89 to 91% at 220V |
|
|
DC PSUs - Input voltage - Maximum current (PSU output – System input) - Efficiency |
- –40 to –72 VDC - 33A (400W unit), 42A (500W unit) - 85 to 88% |
|
|
Typical heat dissipation |
488 BTU/hr |
|
|
Maximum heat dissipation |
1000 BTU/hr |
|
|
Cooling |
- Forward and reversed airflow schemes: ◦ Forward airflow: Port-side exhaust (air enters through fan-tray and power supplies and exits through ports) ◦ Reversed airflow: Port-side intake (air enters through ports and exits through fan-tray and power supplies) - Redundant fans - Hot swappable (must swap within 1 minute) |
|
|
Sound |
Measured sound power (maximum) - Fan speed: 40% duty cycle - Fan speed: 70% duty cycle - Fan speed: 100% duty cycle |
- 64.9 dBA - 69.3 dBA - 76.7 dBA |
|
Environment |
Dimensions |
1.72 x 17.3 x 17 in. (4.4 x 43.9 x 43.2 cm) |
|
Weight |
18.6 lb (8 4 kg) |
|
|
Operating temperature |
- 32 to 104°F (0 to 40°C) |
|
|
Storage temperature |
- -40 to 158°F (-40 to 70°C) |
|
|
Operating relative humidity |
- 10 to 85% noncondensing - Up to 5 days at maximum (85%) humidity - Recommend ASHRAE data center environment |
|
|
Storage relative humidity |
- 5 to 95% noncondensing |
|
|
Altitude |
- 0 to 10,000 ft (0 to 3000m) | |
Low Price Guarantee | ![]() | Quality Assurance | |
![]() | Free CCIE Expert Technical Support | Commodity Refund Guarantee | |
Diversified and Flexible Transportation Services | ![]() | Standard Policy |