The AP2051DN is wall plate APs that can be easily installed in junction boxes (86 mm/120 mm/118 mm) without damaging indoor decoration. The hidden indicator design and the optimized indicator luminance of the AP2051DN reduce the light impact on users. The indicator can also be shut down through the software as required. The built-in smart antennas of the AP2051DN helps achieve better coverage in bathrooms, balconies, and scenarios with obstacles. The APs provide comprehensive service support capabilities, and feature high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance. The AP can connect to wireless terminals through wireless connections or to wired terminals using wired cables. This makes the AP ideal choice for constructing indoor distributed Wi-Fi networks.
The AP2051DN offers both wired and wireless network connections, and is applicable to hotels, apartments, and offices.
A cloud AP must be used together with a cloud server.
| PoE port protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection level | IP20 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/Floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Temperature range | Operating temperature: 0~40℃ Storage temperature: -40~70℃ |
| Humidity range | 5%~95% |
| CE certification | CE(Rohs, Reach, WEEE) |
| Wi-Fi Alliance | Supported |
| Certificate in China | CMIIT ID;CCC;/Certified by the Radio Regulatory Commission/Network Access License of the Ministry of Industry and Information Technology |
| Other certifications (IC/C-Tick) | No |
| Safety regulation | EN 60950-1 |
| Environmental protection | RoHS |
| MIMO | 2x2:2Multiple-input multiple-output (MIMO). For example, 4x4:4 indicates 4SU and 4MU. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain | 2.4G:3dB 5G:4dB(for claim) |
| Radio power (maximum) | 2.4G: 23dBm(Max) 5G: 23dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G : 20dBm/chain)(Max) |
| RF ports and built-in antennas | Built-in smart antenna, Dual bands, 2x2 MIMO |
| Device power consumption | 11.5 W (not including USB or PoE out)14.5 W (including USB of 2.5 W) |
| Ethernet interface | 7xRJ45: 1) In-wall: 1xGE (RJ45, PoE In, 10M/100M/1000M auto, b.1x Pass-Through(RJ45)); 2) outside wall: 4xGE (RJ45, 10M/100M/1000M auto with a port PoE out); b.1x Pass-Through(RJ45) |
| Weight (kg) | 0.25kg |
| Dimensions (H x W x D, in mm) | 86*150*32.5 (note: without hump on the backside) |
| LED indicator | One two-color LED indicator |
| Preferential Selection of Power Supply (DC Input/PoE Input When Both Power Supply Modes Exist) | No priorityNote: 1) Hot backup is not supported between DC and PoE inputs. 2) When the two power supply modes coexist, the DC input range must be 12 V±5%. 1. Differentiate priorities and connect to the power supply with a higher priority. 2. The input source with a higher voltage is used as the main power supply regardless of the priority. Both the input source and the input source may supply power due to the voltage difference of the power adapter, the output voltage difference of the switch, the length of the network cable, and the impedance of the network cable. 3. Hot backup is supported. The system does not restart when one of them is removed. 4. Hot backup is not supported. If one of them is removed, the device may restart. |
| DC input | 45.6V-57V |
| PoE input | 802.3af/at (only supported by in-wall GE0 port) |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |