Home Products Brands Solutions ITAD About Us

AP6050DN Huawei AP6000 802.11ac Wave 2 4x4 MIMU Access Point

Engineer Team Support

7*24h Online

763 412 7282
+86 010 82830816

AP6050DN Overview

Huawei AP6050DN and AP6150DN are the latest-generation wireless access points (APs) that comply with the 802.11ac Wave 2 standard and provide gigabit bandwidth for wireless networks. The APs support smooth evolution from 802.11n to 802.11ac and meet the bandwidth requirements of large-bandwidth services such as High Definition (HD) video streams, multimedia, and desktop cloud services, delivering smooth and high-quality wireless services to enterprise users.

The AP6050DN and AP6150DN apply to high-density scenarios of medium or large size, such as mobile offices, general education, and higher education.

The AP6050DN and AP6150DN support 4×4 MIMO and four spatial streams, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies
Dual Ethernet interfaces supporting link aggregation and traffic load balancing while ensuring link reliability
USB interface used for external power supply and storage
Support for the Fat, Fit, and cloud modes
Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs

Figure 1 shows the appearance of the AP.

Figure 1 AP6050DN appearance

Port

The following figure shows ports on the AP6050DN.

Figure 2 AP6050DN ports

As shown in Figure 2, each port can be described as follows:

USB port: connects to a USB flash drive to extend the storage space of the AP, and provides a maximum of 2.5 W power.
Default button: restores factory settings if you hold down the button more than 3 seconds.
Console port: connects to the maintenance terminal for AP configuration and management.
GE1: 10/100/1000M port that connects to the wired Ethernet.
GE0/PoE: 10/100/1000M port that connects to the wired Ethernet and supports PoE input.
Input port for 12 V DC power supply.
Lock port: protects the AP against theft.

AP6050DN Specification

Technical specifications	Dimensions (H x W x D)	56 mm x 220 mm x 220 mm
	Weight	1.3 kg
	System memory	512 MB DDR3L
	FLASH	16 MB NOR FLASH + 128 MB NAND FLASH
Power specifications	Power input	DC: 12 V ± 10% PoE power supply: in compliance with IEEE 802.3at
Power specifications	Maximum power consumption	22.9 W (excluding the output power of the USB port) NOTE: The actual maximum power consumption depends on local laws and regulations.
Environment specifications	Operating temperature	-60 m to +1800 m: -10°C to +50°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m.
	Storage temperature	-40°C to +70°C
	Operating humidity	5% to 95% (non-condensing)
	IP rating	IP41
	Atmospheric pressure	53 kPa to 106 kPa

Antenna type	Built-in omnidirectional dual-band antenna
Antenna gain	2.4 GHz: 4 dBi 5 GHz: 4 dBi NOTE: After antenna optimization on the AP6050DN, the 2.4 GHz and 5 GHz antenna gains become 4 dBi and 4 dBi (from 6 dBi and 6 dBi), respectively, improving the overall performance of the AP6050DN.
Maximum number of users	Fit AP: ≤ 512 Fat AP: ≤ 512 Cloud AP: ≤ 512 NOTE: The actual number of users varies according to the environment.
Maximum number of VAPs for each radio	16
Maximum transmit power	2.4 GHz: 26 dBm (combined power) 5 GHz: 26 dBm (combined power) NOTE: The actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels	2.4 GHz (2.412 GHz to 2.472 GHz) 802.11b/g 20 MHz: 3 802.11n 20 MHz: 3 40 MHz: 1	5 GHz (5.18 GHz to 5.825 GHz) 802.11a 20 MHz: 13 802.11n 20 MHz: 13 40 MHz: 6 802.11ac 20 MHz: 13 40 MHz: 6 80 MHz: 3 160 MHz: 1	NOTE: The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance. NOTICE: If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage: The country code of the AP is fixed. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency. If the AP is delivered to Europe, pay attention to the following on channel and frequency band usage: The AP cannot work at frequencies in the range of 5725 MHz to 5850 MHz.
Channel rate supported	802.11b: 1, 2, 5.5, and 11 Mbit/s 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n: 6.5 to 800 Mbit/s 802.11ac Wave 2: 6.5 to 1733.3 Mbit/s

AP6050DN Warranty

	Low Price Guarantee Customers can get high quality products at wholesale prices		Quality Assurance All products sold are original genuine goods, new packaging unopened
	100% Money Back Guarantee If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us		Commodity Refund Guarantee For equipment purchased from us, please contact our customer service team for return and replacement services
	Diversified and Flexible Transportation Services Cargo carriers include Fedex, DHL, UPS, Aramex, TNT, EMS		Standard Policy 1 Year