Home Products Brands Solutions ITAD About Us

C9117AXI-EWC-S - Cisco Catalyst 9117 WiFi 6 Access Point

Engineer Team Support

7*24h Online

763 412 7282
+86 010 82830816

C9117AXI-EWC-S Overview

The Cisco Catalyst 9117AX Series wireless access point is a dual band, dual concurrent, enterprise 802.11ax AP.

C9117AXI-EWC-S offers integrated antenna options, designed to use both 2.4 GHz and the 5 GHz bands. This access point supports a greater overall High Density Experience (HDX) which provides a more predictable performance for advanced applications such as 4K or 8K video, high-density high-definition collaboration applications, all-wireless offices and Internet-of-Things (IoT).

C9117AXI-EWC-S Specification

Part numbers		Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller
		● C9117AXI-EWC-x: Cisco Catalyst 9117
		Regulatory domains: (x = regulatory domain)
		Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
		Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.
		Cisco Wireless LAN Services
		● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
		● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
		● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software		● Cisco Unified Wireless Network Software Release 8.9 or later
		● Cisco IOS XE Software Release 16.11 or later
Supported wireless LAN controllers		● Cisco Catalyst 9800 Series Wireless Controllers
		● Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities		● 8x8 MIMO with four spatial streams for 5-GHz band
		● 4x4 MIMO with four spatial streams for 2.4-GHz band
		● Maximal Ratio Combining (MRC)
		● 20- and 40-MHz channels
		● PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
		● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
		● Cyclic Shift Diversity (CSD) support
802.11ac		● 8x8 downlink MU-MIMO with eight spatial streams
		● MRC
		● 802.11ac beamforming
		● 20-, 40-, 80, and 160-MHz channels
		● PHY data rates up to 3.5 Gbps at 5 GHz
		● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
		● CSD support
		● 160 MHz support only on 4-spatial stream
802.11ax		● 8x8 MIMO with eight spatial streams for 5-GHz band
		● 4x4 MIMO with four spatial streams for 2.4-GHz band
		● Downlink OFDMA
		● TWT
		● MRC
		● 802.11ax beamforming
		● 20-, 40-, 80, and 160-MHz channels
		● PHY data rates up to 5 Gbps at 5 GHz
		● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
		● CSD support
Integrated antenna		● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
		● 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces		● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
		● Management console port (RJ-45)
		● USB 2.0 with up to 4.5W (enabled via future software)
Indicators		● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)		● Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
		● Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
Weight		● 3.02 lb (1.4 kg)
Input power requirements		● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE)
		● Cisco power injector, AIR-PWRINJ6=
		● 802.3af PoE
		● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
		Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.
Power draw		802.3bt Cisco UPOE+ Cisco UPOE Full Feature
		Power source	Power type		2.4-GHz	5-GHz	Link speed		USB	LLDP
					radio	radio
		802.3bt Cisco	PoE		4x4	8x8	5 Gbps		Y	28.9W
		UPOE+, Cisco
		UPOE
		802.3at Full Feature*
		Power source	Power type		2.4-GHz	5-GHz	Link speed		USB	LLDP
					radio	radio
		802.3at	PoE		4x4	8x8	5 Gbps		N	25.4W
		802.3af Reduced Feature
		Power source	Power type		2.4-GHz	5-GHz	Link speed		USB	LLDP
					radio	radio
		802.3af	PoE		2x2	2x2	2.5 Gbps		N	13.5W
		* USB port can be enabled, but the 5-GHz radio will be reduced to 4x4.
		Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues
Environmental		● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
		● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
		● Operating temperature: 32° to 122°F (0° to 50°C)
		● Operating humidity: 10% to 90% (noncondensing)
		● Operating altitude test: 40˚C, 9843 ft.
System memory		● 2048 MB DRAM
		● 1024 MB flash
Warranty		Limited lifetime hardware warranty
Available transmit power settings		2.4 GHz				5 GHz
		● 23 dBm (200 mW)				● 26 dBm (400 mW)
		● -6 dBm (0.25 mW)				● -4 dBm (0.4 mW)
Regulatory domains		Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
		For information about Regulatory Domain support, refer to the Cisco Regulatory Domain White Paper
Compliance standards		● Safety:					◦ EN 301 893 (v2.1.1)
		◦ IEC 60950-1					◦ AS/NZS 4268 (rev. 2017)
		◦ EN 60950-1					◦ 47 CFR FCC Part 15C, 15.247, 15.407
		◦ AS/NZS 60950.1					◦ RSP-100
		◦ UL 60950-1					◦ RSS-GEN
		◦ CAN/CSA-C22.2 No. 60950-1					◦ RSS-247
		◦ UL 2043					◦ China regulations SRRC
		◦ Class III equipment					◦ LP0002 (rev 2018.1.10)
		● Emissions:					◦ Japan Std. 33a, Std. 66, and Std. 71
		◦ CISPR 32 (rev. 2015)					◦ EMI and susceptibility (Class B)
		◦ EN 55032 (rev. 2012/AC:2013)					● RF safety:
		◦ EN 55032 (rev. 2015)					◦ EN 50385 (rev. Aug 2002)
		◦ EN61000-3-2 (rev. 2014)					◦ ARPANSA
		◦ EN61000-3-3 (rev. 2013)					◦ AS/NZS 2772 (rev. 2016)
		◦ KN61000-3-2					◦ EN 62209-1 (rev. 2016)
		◦ KN61000-3-3					◦ EN 62209-2 (rev. 2010)
		◦ AS/NZS CISPR 32 Class B (rev. 2015)					◦ 47 CFR Part 1.1310 and 2.1091
		◦ 47 CFR FCC Part 15B					◦ RSS-102
		◦ ICES-003 (rev. 2016 Issue 6, Class B)					● IEEE standards:
		◦ VCCI (V3)					◦ IEEE 802.3
		◦ CNS (rev. 13438)					◦ IEEE 802.3ab
		◦ KN-32					◦ IEEE 802.3af/at/bt
		◦ TCVN 7189 (rev. 2009)					◦ IEEE 802.11 a/b/g/n/ac/ax
		● Immunity:					◦ IEEE 802.11h, 802.11d
		◦ CISPR 24 (rev. 2010)					● Security:
		◦ EN 55024/EN 55035 (rev. 2010)					◦ 802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA
		● Emissions and immunity:					◦ 802.1X
		◦ EN 301 489-1 (v2.1.1 2017-02)					◦ Advanced Encryption Standard (AES)
		◦ EN 301 489-17 (v3.1.1 2017-02)					● Extensible Authentication Protocol (EAP) types:
		◦ QCVN (18:2014)					◦ EAP-Transport Layer Security (TLS)
		◦ KN 489-1					◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
		◦ KN 489-17					◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2
		● Radio:					◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
		◦ EN 300 328 (v2.1.1)					◦ PEAP v1 or EAP-Generic Token Card (GTC)
							◦ EAP-Subscriber Identity Module (SIM)
Datarate/Transmit Power/ Receive sensitivity		For more detailed information about Datarate/TX Power/Receive sensitivity, Please refer Cisco RF Details
Transmit power and receive sensitivity
		5-GHz radio				2.4-GHz radio
	Spatial streams	Total transmit power (dBm)		Receive sensitivity (dBm)		Total transmit power (dBm)		Receive sensitivity (dBm)
802.11/11b
1 Mbps	1	-		-		23		-98
11 Mbps	1	-		-		23		-89
802.11a/g
6 Mbps	1	23		-95		23		-94
24 Mbps	1	22		-88		22		-87
54 Mbps	1	21		-79		20		-78
802.11n HT20
MCS0	1	23		-95		23		-94
MCS31	4	20		-74		20		-73
802.11n HT40
MCS0	1	23		-93		-		-
MCS31	4	20		-72		-		-
802.11ac VHT20
MCS0	1	23		-95		-		-
MCS8	1	20		-75		-		-
MCS9	1	NA		NA		-		-
MCS0	2	23		-95		-		-
MCS8	2	20		-74		-		-
MCS9	2	NA		NA		-		-
MCS0	3	23		-95		-		-
MCS9	3	19		-72		-		-
MCS0	4	23		-94		-		-
MCS9	4	19		-71		-		-
802.11ac VHT40
MCS0	1	23		-94		-		-
MCS9	1	19		-71		-		-
MCS0	2	23		-93		-		-
MCS9	2	19		-70		-		-
MCS0	3	23		-92		-		-
MCS9	3	19		-69		-		-
MCS0	4	23		-91		-		-
MCS9	4	19		-68		-		-
802.11ac VHT80
MCS0	1	23		-91		-		-
MCS9	1	19		-67		-		-
MCS0	2	23		-90		-		-
MCS9	2	19		-66		-		-
MCS0	3	23		-89		-		-
MCS9	3	19		-65		-		-
MCS0	4	23		-88		-		-
MCS9	4	19		-64		-		-
802.11ac VHT160
MCS0	1	23		-88		-		-
MCS9	1	18		-65		-		-
MCS0	2	23		-87		-		-
MCS9	2	18		-64		-		-
MCS0	3	23		-86		-		-
MCS9	3	18		-63		-		-
MCS0	4	23		-85		-		-
MCS9	4	18		-62		-		-
802.11ax HE20
MCS0	1	23		-95		23		-94
MCS11	1	18		-68		16		-67
MCS0	2	23		-95		23		-94
MCS11	2	18		-67		16		-66
MCS0	3	23		-95		23		-94
MCS11	3	18		-66		16		-65
MCS0	4	23		-94		23		-93
MCS11	4	18		-65		16		-64
802.11ax HE40
MCS0	1	23		-94
MCS11	1	18		-65
MCS0	2	23		-93
MCS11	2	18		-64
MCS0	3	23		-92
MCS11	3	18		-63
MCS0	4	23		-91
MCS11	4	18		-62
802.11ax HE80
MCS0	1	23		-91		-		-
MCS11	1	17		-63		-		-
MCS0	2	23		-90		-		-
MCS11	2	17		-62		-		-
MCS0	3	23		-89		-		-
MCS11	3	17		-61		-		-
MCS0	4	23		-88		-		-
MCS11	4	17		-60		-		-
802.11ax HE160
MCS0	1	23		-88		-		-
MCS11	1	16		-59		-		-
MCS0	2	23		-87		-		-
MCS11	2	16		-58		-		-
MCS0	3	23		-86		-		-
MCS11	3	16		-57		-		-
MCS0	4	23		-85		-		-
MCS11	4	16		-56		-		-

C9117AXI-EWC-S Warranty

	Low Price Guarantee Customers can get high quality products at wholesale prices		Quality Assurance All products sold are original genuine goods, new packaging unopened
	Free CCIE Expert Technical Support We provide our customers with free CCIE technical support via phone, intelligent AI and email		Commodity Refund Guarantee For equipment purchased from us, please contact our customer service team for return and replacement services
	Diversified and Flexible Transportation Services Cargo carriers include Fedex, DHL, UPS, Aramex, TNT, EMS		Standard Policy 1 Year