C9130AXI-EWC-G - Cisco Catalyst 9130 Indoor 802.11ax Access Points
C9130AXI-EWC-GPrice:US $946.00
C9130AXI-EWC-G - Cisco Catalyst 9130 Indoor 802.11ax Access Points
Engineer Team Support
7*24h Online
- 763 412 7282
- +86 010 82830816
C9130AXI-EWC-G Overview
As one of the Cisco Catalyst 9130AX Series Access Points, C9130AXI-EWC-G is the next generation of enterprise access points. They are resilient, secure, and intelligent.
Cisco Catalyst 9130AX Series Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.
The Cisco Catalyst 9130AX Series Access Points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides.
C9130AXI-EWC-G Specification
| Part numbers | Cisco Catalyst 9130AXI Access Point: Indoor environments, with internal antennas | |||||||||||
| ● C9130AXI-x: Cisco Catalyst 9130AX Series | ||||||||||||
| ● C9130AXI-EWC-x: Cisco Catalyst 9130AX Series with Embedded Wireless Controller | ||||||||||||
| Regulatory domains: (x = regulatory domain) | ||||||||||||
| Customers are responsible for verifying approval for use in their individual countries. | ||||||||||||
| Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. | ||||||||||||
| Cisco Wireless LAN Services | ||||||||||||
| ● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service | ||||||||||||
| ● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service | ||||||||||||
| ● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service | ||||||||||||
| Software | Catalyst 9130AXI | |||||||||||
| ● Cisco Unified Wireless Network Software Release 8.10.x or later | ||||||||||||
| ● Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later | ||||||||||||
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers | |||||||||||
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller | ||||||||||||
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams | |||||||||||
| ● Maximal Ratio Combining (MRC) | ||||||||||||
| ● 802.11n and 802.11a/g | ||||||||||||
| ● 20- and 40-MHz channels | ||||||||||||
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||||||||||||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||||||||||||
| ● 802.11 Dynamic Frequency Selection (DFS) | ||||||||||||
| ● Cyclic Shift Diversity (CSD) support | ||||||||||||
| 802.11ac | ● 8x8 downlink MU-MIMO with eight spatial streams | |||||||||||
| ● MRC | ||||||||||||
| ● 802.11ac beamforming | ||||||||||||
| ● 20-, 40-, 80-, and 160-MHz channels | ||||||||||||
| ● PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz) | ||||||||||||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||||||
| ● 802.11 DFS | ||||||||||||
| ● CSD support | ||||||||||||
| ● Wi-Fi Protected Access (WPA) 3 support | ||||||||||||
| 802.11ax | ● 8x8 uplink/downlink MU-MIMO with eight spatial streams | |||||||||||
| ● Uplink/downlink OFDMA | ||||||||||||
| ● TWT | ||||||||||||
| ● BSS coloring | ||||||||||||
| ● MRC | ||||||||||||
| ● 802.11ax beamforming | ||||||||||||
| ● 20-, 40-, 80-, and 160-MHz channels | ||||||||||||
| ● PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4) | ||||||||||||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||||||
| ● 802.11 DFS | ||||||||||||
| ● CSD support | ||||||||||||
| ● WPA3 support | ||||||||||||
| Integrated antenna | ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |||||||||||
| ● 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth | ||||||||||||
| External antenna with smart antenna connector | ● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios | |||||||||||
| ● Supports Self-Identifiable Antennas (SIA) on the smart antenna connector | ||||||||||||
| ● Smart antenna connector is a compact multi-RF connector with 8-DART interface | ||||||||||||
| ● Requires the AIR-CAB002-D8-R= 2 ft smart antenna connector when used with antennas with a RP-TNC connector | ||||||||||||
| ● Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna | ||||||||||||
| ● For more details, see the Catalyst 9130AX Series Getting Started Guide. | ||||||||||||
| Interfaces | ● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) | |||||||||||
| ● Management console port (RJ-45) | ||||||||||||
| ● USB 2.0 at 4.5W | ||||||||||||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |||||||||||
| Dimensions (W x L x H) | ● Access point (without mounting brackets): | |||||||||||
| ◦ C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm) | ||||||||||||
| Weight | Cisco Catalyst 9130AXI | |||||||||||
| ● 3.2 lb. (1.45 kg) | ||||||||||||
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE) | |||||||||||
| ● Cisco power injector, AIR-PWRINJ6= | ||||||||||||
| ● 802.3af PoE | ||||||||||||
| ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) | ||||||||||||
| Catalyst 9130AXI | ||||||||||||
| Power source | 2.4-GHz radio | 5-GHz radio | Link speed | USB | Max PoW Power Consumption | |||||||
| 802.3at (PoE+) | 4x4 | 8x8 | 5G | N | 25.5W | |||||||
| 802.3at (PoE+) | 4x4 | 4x4 | 5G | Y [4.5W] | 25.5W | |||||||
| 802.3bt (Cisco UPOE) | 4x4 | 8x8 | 5G | Y [4.5W] | 30.5W | |||||||
| 802.3af | PoE | 1x1 | 1x1 | 1G | N | 13.4W | ||||||
| Note: Actual power consumption may very depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation. | ||||||||||||
| Environmental | Cisco Catalyst 9130AXI | |||||||||||
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||||||||||||
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) | ||||||||||||
| ● Operating temperature: 32° to 122°F (0° to 50°C) | ||||||||||||
| ● Operating humidity: 10% to 90% (noncondensing) | ||||||||||||
| ● Operating altitude test: 40˚C, 9843 ft (3000 m) | ||||||||||||
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled. | ||||||||||||
| System memory | ● 2048 MB DRAM | |||||||||||
| ● 1024 MB flash | ||||||||||||
| Warranty | Limited lifetime hardware warranty | |||||||||||
| Available transmit power settings | 2.4 GHz | 5 GHz | ||||||||||
| ● 23 dBm (200 mW) | ● 26 dBm (400 mW) | |||||||||||
| ● -4 dBm(0.39 mW) | ● -1 dBm (0.79 mW) | |||||||||||
| Regulatory domains | Note: Customers are responsible for verifying approval for use in their individual countries. | |||||||||||
| For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper. | ||||||||||||
| Compliance standards | ● Safety: | ● Radio: | ||||||||||
| ◦ IEC 60950-1 | ◦ EN 300 328 (v2.1.1) | |||||||||||
| ◦ EN 60950-1 | ◦ EN 301 893 (v2.1.1) | |||||||||||
| ◦ UL 60950-1 | ◦ AS/NZS 4268 (rev. 2017) | |||||||||||
| ◦ CAN/CSA-C22.2 No. 60950-1 | ◦ 47 CFR FCC Part 15C, 15.247, 15.407 | |||||||||||
| ◦ AS/NZS60950.1 | ◦ RSP-100 | |||||||||||
| ◦ UL 2043 | ◦ RSS-GEN | |||||||||||
| ◦ Class III equipment | ◦ RSS-247 | |||||||||||
| ● Emissions: | ◦ China regulations SRRC | |||||||||||
| ◦ CISPR 32 (rev. 2015) | ◦ LP0002 (rev 2018.1.10) | |||||||||||
| ◦ EN 55032 (rev. 2012/AC:2013) | ◦ Japan Std. 33a, Std. 66, and Std. 71 | |||||||||||
| ◦ EN 55032 (rev. 2015) | ● RF safety: | |||||||||||
| ◦ EN61000-3-2 (rev. 2014) | ◦ EN 50385 (rev. Aug 2002) | |||||||||||
| ◦ EN61000-3-3 (rev. 2013) | ◦ ARPANSA | |||||||||||
| ◦ KN61000-3-2 | ◦ AS/NZS 2772 (rev. 2016) | |||||||||||
| ◦ KN61000-3-3 | ◦ EN 62209-1 (rev. 2016) | |||||||||||
| ◦ AS/NZS CISPR 32 Class B (rev. 2015) | ◦ EN 62209-2 (rev. 2010) | |||||||||||
| ◦ 47 CFR FCC Part 15B | ◦ 47 CFR Part 1.1310 and 2.1091 | |||||||||||
| ◦ ICES-003 (rev. 2016 Issue 6, Class B) | ◦ RSS-102 | |||||||||||
| ◦ VCCI-CISPR 32 | ● IEEE standards: | |||||||||||
| ◦ CNS (rev. 13438) | ◦ IEEE 802.3 | |||||||||||
| ◦ KN-32 | ◦ IEEE 802.3ab | |||||||||||
| ◦ QCVN 118:2018/BTTTT | ◦ IEEE 802.3af/at | |||||||||||
| ● Immunity: | ◦ IEEE 802.11a/b/g/n/ac/ax | |||||||||||
| ◦ CISPR 24 (rev. 2010) | ◦ IEEE 802.11h, 802.11d | |||||||||||
| ◦ EN 55024 + AMD 1(rev. 2010) | ● Security: | |||||||||||
| ◦ EN 55035: 2017 | ◦ 802.11i, (WPA2, WPA3 | |||||||||||
| ◦ KN35 | ◦ 802.1X | |||||||||||
| ● Emissions and immunity: | ◦ Advanced Encryption Standard (AES) | |||||||||||
| ◦ EN 301 489-1 (v2.1.1 2017-02) | ● Extensible Authentication Protocol (EAP) types: | |||||||||||
| ◦ EN 301 489-17 (v3.1.1 2017-02) | ◦ EAP-Transport Layer Security (TLS) | |||||||||||
| ◦ QCVN (18:2014) | ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 | |||||||||||
| ◦ QCVN 112:2017/BTTTT | ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 | |||||||||||
| ◦ KN 489-1 | ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) | |||||||||||
| ◦ KN 489-17 | ◦ PEAP v1 or EAP-Generic Token Card (GTC) | |||||||||||
| ◦ EN 60601-1-2:2015 | ◦ EAP-Subscriber Identity Module (SIM) | |||||||||||
| ◦ EN 61000-6-1: 2007 | ||||||||||||
| Data rate, transmit power, receive sensitivity | For more detailed information about data rate, transmit power, and receive sensitivity, please refer to the Cisco RF details. | |||||||||||
| Transmit (Tx) power and receive (Rx) sensitivity | ||||||||||||
| 5-GHz primary radio | 5-GHz secondary radio | 2.4-GHz radio | ||||||||||
| Number of active antennas | Total Tx power (dBm) | Rx sensitivity (dBm) | Total Tx power (dBm) | Rx sensitivity (dBm) | Total Tx power (dBm) | Rx sensitivity (dBm) | ||||||
| 802.11/11b | ||||||||||||
| 1 Mbps | 4 | – | – | – | – | 23 | -104 | |||||
| 11 Mbps | 4 | – | – | – | – | 23 | -96 | |||||
| 802.11a/g | ||||||||||||
| 6 Mbps | 4 | 23 | -100 | 23 | -99 | 23 | -98 | |||||
| 24 Mbps | 4 | 22 | -92 | 22 | -92 | 22 | -91 | |||||
| 54 Mbps | 4 | 21 | -84 | 21 | -83 | 20 | -82 | |||||
| 802.11n HT20 | ||||||||||||
| MCS0 | 4 | 23 | -99 | 23 | -99 | 23 | -98 | |||||
| MCS31 | 4 | 20 | -77 | 20 | -77 | 20 | -75 | |||||
| 802.11n HT40 | ||||||||||||
| MCS0 | 4 | 23 | -96 | 23 | -96 | – | – | |||||
| MCS31 | 4 | 20 | -75 | 20 | -75 | – | – | |||||
| 802.11ac VHT20 | ||||||||||||
| MCS0 | 4 | 23 | -100 | 23 | -99 | – | – | |||||
| MCS9 | 4 | – | – | – | – | – | – | |||||
| MCS0 | 8 | 26 | -102 | – | – | – | ||||||
| MCS8 | 8 | 23 | -73 | – | – | – | ||||||
| MCS9 | 8 | – | – | – | – | – | ||||||
| 802.11ac VHT40 | ||||||||||||
| MCS0 | 4 | 23 | -96 | 23 | -96 | – | – | |||||
| MCS9 | 4 | 19 | -69 | 19 | -69 | – | – | |||||
| MCS0 | 8 | 26 | -99 | – | – | – | ||||||
| MCS9 | 8 | 22 | -69 | – | – | – | ||||||
| 802.11ac VHT80 | ||||||||||||
| MCS0 | 4 | 23 | -93 | 23 | -93 | – | – | |||||
| MCS9 | 4 | 19 | -65 | 19 | -64 | – | – | |||||
| MCS0 | 8 | 26 | -95 | – | – | – | ||||||
| MCS9 | 8 | 22 | -65 | – | – | – | ||||||
| 802.11ac VHT160 | ||||||||||||
| MCS0 | 4 | 26 | -89 | – | – | – | ||||||
| MCS9 | 4 | 21 | -61 | – | – | – | ||||||
| 802.11ax HE20 | ||||||||||||
| MCS0 | 4 | 23 | -99 | 23 | -99 | 23 | -98 | |||||
| MCS11 | 4 | 18 | -66 | 18 | -66 | 17 | -65 | |||||
| MCS0 | 8 | 26 | -102 | – | – | – | ||||||
| MCS11 | 8 | 21 | -65 | – | – | – | ||||||
| 802.11ax HE40 | ||||||||||||
| MCS0 | 4 | 23 | -96 | 23 | -96 | – | – | |||||
| MCS11 | 4 | 18 | -63 | 18 | -62 | – | – | |||||
| MCS0 | 8 | 26 | -99 | – | – | – | ||||||
| MCS11 | 8 | 21 | -63 | – | – | – | ||||||
| 802.11ax HE80 | ||||||||||||
| MCS0 | 4 | 23 | -93 | 23 | -93 | – | – | |||||
| MCS11 | 4 | 17 | -59 | 17 | -59 | – | – | |||||
| MCS0 | 8 | 26 | -96 | – | – | – | ||||||
| MCS11 | 8 | 20 | -59 | – | – | – | ||||||
| 802.11ax HE160 | ||||||||||||
| MCS0 | 4 | 26 | -88 | – | – | – | ||||||
| MCS11 | 4 | 19 | -56 | – | – | – | ||||||
C9130AXI-EWC-G Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | Free CCIE Expert Technical Support |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
