C9105AXW-H Cisco Catalyst 9105 2x2:2 SS MU-MIMO Enterprise WiFi 6 APs
C9105AXW-HC9105AXW-H Cisco Catalyst 9105 2x2:2 SS MU-MIMO Enterprise WiFi 6 APs
- 763 412 7282
- +86 010 82830816
C9105AXW-H Overview
The Cisco Catalyst 9105 Series Access Points are the most versatile next generation access point in enterprise grade.
The Catalyst 9105w is specifically designed to be mounted to the wall and is ideal for hospitality, residence halls and other multi-dwelling units.
The Catalyst 9105 Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11 ax) standard, the Catalyst 9105 Access Points provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.
Access Point Features
The C9105AXI and C9105AXIT wireless APs are wireless controller-based products and support the following features:
■
Two dual-band internal antennas and one single-band internal IoT–BLE antenna in both the C9105AXI-x and C9105AXIT-x AP models
■Integrated antennas that are omni directional in azimuth, for both 2.4 GHz (peak gain 4dBi) and 5 GHz (peak gain 5dBi) bands.
■The following hardware external interfaces:
–1x100/1000 GigEthernet (RJ-45)
–RS-232 console interface through RJ-45
–Mode button (enables partial or full system configuration recovery)
–One multi-color LED Status indicator. See the Checking the Access Point LEDs for information on the colors of the LED status indicator.
■Simultaneous 2x2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams for both 2.4 GHz and 5 GHz bands.
■Multiuser (MU) MIMO technology with 2 spatial streams for downlink.
■MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.
■Orthogonal Frequency Division Multiple Access (OFDMA)-based scheduling for both uplink and downlink.
■Spatial Reuse (also known as Basic Service Set (BSS) coloring) which allows APs and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.
■New power savings mode called Target Wake Time (TWT) which allows the client to stay asleep and wake up only at pre-scheduled (target) times to exchange data with the AP. This provides significant energy savings for battery-operated devices.
■Cisco Catalyst Center support enables Cisco Spaces (formerly Cisco DNA Spaces), Apple FastLane and Cisco Identity Services Engine.
■Cross-AP Noise Reduction, a Cisco innovation that enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
■Optimized AP Roaming for ensuring that client devices associate with the AP in their coverage range that offers the fastest data rate available.
■Cisco CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems arising from wireless interference.
This AP supports both lightweight deployments (using Cisco Wireless Controllers) and Cisco Embedded Wireless Controller dep
C9105AXW-H Specification
| Part numbers | Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas | |||||||||
| ● C9105AXW-x: Cisco Catalyst 9105 Series | ||||||||||
| Regulatory domains: (x = regulatory domain) | ||||||||||
| Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country. | ||||||||||
| Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. | ||||||||||
| Cisco Wireless LAN Services | ||||||||||
| ● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service | ||||||||||
| ● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service | ||||||||||
| Accessories | ● Mounting bracket: AIR-AP-BRACKET-W4= (available as spare) | |||||||||
| ● Spacer kit: C9105AXW-KIT (sold separately) | ||||||||||
| Software | Catalyst 9105AXW | |||||||||
| ● Cisco Unified Wireless Network Software Release 8.10MR3 or later | ||||||||||
| ● Cisco IOS XE Software Release 17.3.1 or later | ||||||||||
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers | |||||||||
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller | ||||||||||
| 802.11n version 2.0 (and related) capabilities | ● 2x2 MIMO with two spatial streams | |||||||||
| ● Maximal Ratio Combining (MRC) | ||||||||||
| ● 802.11n and 802.11a/g | ||||||||||
| ● 20- and 40-MHz channels | ||||||||||
| ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||||||||||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||||||||||
| ● 802.11 Dynamic Frequency Selection (DFS) | ||||||||||
| ● Cyclic Shift Diversity (CSD) support | ||||||||||
| 802.11ac | ● 2x2 downlink MU-MIMO with two spatial streams | |||||||||
| ● MRC | ||||||||||
| ● 802.11ac beamforming | ||||||||||
| ● 20-, 40-, 80- MHz channels | ||||||||||
| ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) | ||||||||||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||||
| ● 802.11 DFS | ||||||||||
| ● CSD support | ||||||||||
| ● WPA3 support | ||||||||||
| 802.11ax | ● 2x2 uplink/downlink MU-MIMO with two spatial streams | |||||||||
| ● Uplink/downlink OFDMA | ||||||||||
| ● TWT | ||||||||||
| ● BSS coloring | ||||||||||
| ● MRC | ||||||||||
| ● 802.11ax beamforming | ||||||||||
| ● 20-, 40-, 80- channels | ||||||||||
| ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||||||||||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||||
| ● 802.11 DFS | ||||||||||
| ● CSD support | ||||||||||
| ● WPA3 support | ||||||||||
| Integrated antenna | Catalyst 9105AXW | |||||||||
| ● 2.4 GHz: Peak gain 3 dBi, internal antenna | ||||||||||
| ● 5 GHz: Peak gain 5 dBi, internal antenna | ||||||||||
| Interfaces | Catalyst 9105AXW | |||||||||
| ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface | ||||||||||
| ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) | ||||||||||
| ● Management console port (RJ-45) | ||||||||||
| ● USB 2.0 at 4.5W | ||||||||||
| ● Passthru Port | ||||||||||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |||||||||
| Dimensions | ● Access point (without mounting brackets): | |||||||||
| (W x L x H) | ◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) | |||||||||
| Weight | Cisco Catalyst 9105AXW | |||||||||
| ● 0.8 lb. (373.2g) | ||||||||||
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE) | |||||||||
| ● Cisco power injector, AIR-PWRINJ6= | ||||||||||
| ● 802.3af PoE | ||||||||||
| ● Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af) | ||||||||||
| Catalyst 9105AXW | ||||||||||
| PoE power | 2.4-GHz radio | 5-GHz radio | Link speed | USB | LAN1 PSE | |||||
| 802.3af (PoE) | 2x2 | 2x2 | 2.5G mGig | Disabled | Disabled | |||||
| 802.3at (PoE+) | 2x2 | 2x2 | 2.5G mGig | Either USB or LAN1 PSE enabled. | ||||||
| Environmental | Cisco Catalyst 9105AXW | |||||||||
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||||||||||
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) | ||||||||||
| ● Operating temperature: 32° to 122°F (0° to 50°C) | ||||||||||
| ● Operating humidity: 10% to 90% (noncondensing) | ||||||||||
| ● Operating altitude test: 40˚C, 9843 ft (3000 m) | ||||||||||
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled. | ||||||||||
| Available transmit power settings (Max/Min) | ● 2.4 GHz | ● 5 GHz | ||||||||
| ◦ 20 dBm (100 mW) | ◦ 20 dBm (100 mW) | |||||||||
| ◦ -7 dBm (0.2 mW) | ◦ -7 dBm (0.2 mW) | |||||||||
| Regulatory domains | Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country. | |||||||||
| For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper. | ||||||||||
| Compliance | ● Safety: | ● Radio: | ||||||||
| ◦ IEC 60950-1 | ◦ EN 300 328 (v2.1.1) | |||||||||
| ◦ EN 60950-1 | ◦ EN 301 893 (v2.1.1) | |||||||||
| ◦ UL 60950-1 | ◦ AS/NZS 4268 (rev. 2017) | |||||||||
| ◦ IEC 62368-1 | ◦ 47 CFR FCC Part 15C, 15.247, 15.407 | |||||||||
| ◦ EN 62368-1 | ◦ RSP-100 | |||||||||
| ◦ UL/CUL 62368 – 1 | ◦ RSS-GEN | |||||||||
| ◦ CAN/CSA-C22.2 No. 60950-1 | ◦ RSS-247 | |||||||||
| ◦ AS/NZS60950.1 | ◦ China regulations SRRC | |||||||||
| ◦ Class III equipment | ◦ Japan Std. 33a, Std. 66, and Std. 71 | |||||||||
| ● Emissions: | ● RF safety: | |||||||||
| ◦ CISPR 32 (rev. 2015) | ◦ EN 50385 (rev. Aug 2002) | |||||||||
| ◦ EN 55032 (rev. 2012/AC:2013) | ◦ ARPANSA | |||||||||
| ◦ EN 55032 (rev. 2015) | ◦ AS/NZS 2772 (rev. 2016) | |||||||||
| ◦ EN61000-3-2 (rev. 2014) | ◦ EN 62209-1 (rev. 2016) | |||||||||
| ◦ EN61000-3-3 (rev. 2013) | ◦ EN 62209-2 (rev. 2010) | |||||||||
| ◦ KN61000-3-2 | ◦ 47 CFR Part 1.1310 and 2.1091 | |||||||||
| ◦ KN61000-3-3 | ◦ RSS-102 | |||||||||
| ◦ AS/NZS CISPR 32 Class B (rev. 2015) | ● IEEE standards: | |||||||||
| ◦ 47 CFR FCC Part 15B | ◦ IEEE 802.3 | |||||||||
| ◦ ICES-003 (rev. 2016 Issue 6, Class B) | ◦ IEEE 802.3ab | |||||||||
| ◦ VCCI-CISPR 32 | ◦ IEEE 802.3af/at | |||||||||
| ◦ CNS (rev. 13438) | ◦ IEEE 802.11a/b/g/n/ac/ax | |||||||||
| ◦ KN-32 | ◦ IEEE 802.11h, 802.11d | |||||||||
| ◦ QCVN 118:2018/BTTTT | ● Security: | |||||||||
| ● Immunity: | ◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3 | |||||||||
| ◦ CISPR 24 (rev. 2010) | ◦ 802.1X | |||||||||
| ◦ EN 55024 + AMD 1 (rev. 2010) | ◦ Advanced Encryption Standard (AES) | |||||||||
| ◦ EN 55035: 2017 | ● Extensible Authentication Protocol (EAP) types: | |||||||||
| ◦ KN35 | ◦ EAP-Transport Layer Security (TLS) | |||||||||
| ● Emissions and immunity: | ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 | |||||||||
| ◦ EN 301 489-1 (v2.1.1 2017-02) | ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 | |||||||||
| ◦ EN 301 489-17 (v3.1.1 2017-02) | ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) | |||||||||
| ◦ QCVN (18:2014) | ◦ PEAP v1 or EAP-Generic Token Card (GTC) | |||||||||
| ◦ QCVN 112:2017/BTTTT | ◦ EAP-Subscriber Identity Module (SIM) | |||||||||
| ◦ KN 489-1 | ||||||||||
| ◦ KN 489-17 | ||||||||||
| ◦ EN 61000-6-1: 2007 | ||||||||||
| Datarate/Transmit Power/ Receive sensitivity | ● For information about Datarate, Transmit power and Receive Sensitivity, refer to Cisco RF details | |||||||||
| Transmit power and receive sensitivity | ||||||||||
| 5 GHz Radio | 2.4 GHz Radio | |||||||||
| Spatial streams | Number of active antennas | Total TX power (dBm) | RX sensitivity (dBm) | Total TX power (dBm) | RX sensitivity (dBm) | |||||
| 802.11/11b | ||||||||||
| 1 Mbps | 1 | 2 | – | – | 20 | -99 | ||||
| 11 Mbps | 1 | 2 | – | – | 20 | -91 | ||||
| 802.11a/g | ||||||||||
| 6 Mbps | 1 | 2 | 20 | -97 | 20 | -93 | ||||
| 24 Mbps | 1 | 2 | 20 | -89 | 20 | -86 | ||||
| 54 Mbps | 1 | 2 | 20 | -80 | 20 | -78 | ||||
| 802.11n HT20 | ||||||||||
| MCS0 | 1 | 2 | 20 | -96 | 20 | -93 | ||||
| MCS15 | 2 | 2 | 20 | -75 | 20 | -73 | ||||
| 802.11n HT40 | ||||||||||
| MCS0 | 1 | 2 | 20 | -93 | – | – | ||||
| MCS15 | 2 | 2 | 20 | -72 | – | – | ||||
| 802.11ac VHT20 | ||||||||||
| MCS0 | 1 | 2 | 20 | -96 | – | – | ||||
| MCS8 | 1 | 2 | 20 | -74 | – | – | ||||
| MCS0 | 2 | 2 | 20 | -94 | – | – | ||||
| MCS8 | 2 | 2 | 20 | -71 | – | – | ||||
| MCS9 | 2 | 2 | - | - | – | – | ||||
| 802.11ac VHT40 | ||||||||||
| MCS0 | 1 | 2 | 20 | -93 | – | – | ||||
| MCS9 | 1 | 2 | 20 | -69 | – | – | ||||
| MCS0 | 2 | 2 | 20 | -91 | – | – | ||||
| MCS9 | 2 | 2 | 20 | -66 | – | – | ||||
| 802.11ac VHT80 | ||||||||||
| MCS0 | 1 | 2 | 20 | -90 | – | – | ||||
| MCS9 | 1 | 2 | 20 | -66 | – | – | ||||
| MCS0 | 2 | 2 | 20 | -88 | – | – | ||||
| MCS9 | 2 | 2 | 20 | -63 | – | – | ||||
| 802.11ax HE20 | ||||||||||
| MCS0 | 1 | 2 | 20 | -96 | 20 | -93 | ||||
| MCS11 | 1 | 2 | 19 | -66 | 19 | -64 | ||||
| MCS0 | 2 | 2 | 20 | -95 | 20 | -91 | ||||
| MCS11 | 2 | 2 | 19 | -65 | 19 | -63 | ||||
| 802.11ax HE40 | ||||||||||
| MCS0 | 1 | 2 | 20 | -93 | – | – | ||||
| MCS11 | 1 | 2 | 19 | -63 | – | – | ||||
| MCS0 | 2 | 2 | 20 | -92 | – | – | ||||
| MCS11 | 2 | 2 | 19 | -62 | – | – | ||||
| 802.11ax HE80 | ||||||||||
| MCS0 | 1 | 2 | 20 | -90 | – | – | ||||
| MCS11 | 1 | 2 | 19 | -60 | – | – | ||||
| MCS0 | 2 | 2 | 20 | -89 | – | – | ||||
| MCS11 | 2 | 2 | 19 | -59 | – | – | ||||
C9105AXW-H Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | Free CCIE Expert Technical Support |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
