C9130AXE-H - Cisco Catalyst 9130 Indoor WiFi 6 Access Points

C9130AXE-H
Price:US $1,381.00
C9130AXE-H - Cisco Catalyst 9130 Indoor WiFi 6 Access Points
C9130AXE-H - Cisco Catalyst 9130 Indoor WiFi 6 Access Points

C9130AXE-H - Cisco Catalyst 9130 Indoor WiFi 6 Access Points

C9130AXE-H

Cisco Catalyst 9130AXE Access Point: Challenging indoor environments, with external antennas, Dual-band, controller-based 802.11ax.

New Factory Sealed
US$ 1,381.00
mastercard paypal t-t visa
C9130AXE-H - Cisco Catalyst 9130 Indoor WiFi 6 Access Points
Engineer Team Support
7*24h Online
  • 763 412 7282
  • +86 010 82830816

C9130AXE-H Overview

The Cisco Catalyst 9130AX Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.

Cisco Catalyst 9130AX Series Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.

The Cisco Catalyst 9130AX Series Access Points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides.

Cisco Catalyst 9130 Series key features

●      Next-generation Wi-Fi 6 (802.11ax) access points with 4x4 Multiple-Input Multiple-Output (MIMO) and four spatial streams:

◦   8x8:8 single or dual 4x4:4 on 5 GHz and downlink/uplink Orthogonal Frequency-Division Multiple Access (OFDMA)

◦   4x4:4 on 2.4 GHz with multiuser MIMO (MU-MIMO) and downlink/uplink OFDMA

●      Cisco DNA ready

●      Cisco RF Application-Specific Integrated Circuit (ASIC) with next-generation Cisco CleanAir® and upgradable RF features

●      Built-in Bluetooth Low Energy (BLE) radio (Bluetooth 5.0)

●      Multigigabit Ethernet (1 Gbps, 2.5 and 5 Gbps)

●      USB

●      Supports up to 500 Wi-Fi devices

●      IoT ready (BLE)

●      Internal and external antenna options

●      Operating temperature for 9130I: -32° to 122°F (0° to 50°C)

●      Operating temperature for 9130E: -4° to 122°F (-20° to 50°C)

C9130AXE-H Specification

Part numbers Cisco Catalyst 9130AXE Access Point: Challenging indoor environments, with external antennas
●  C9130AXE-x: Cisco Catalyst 9130AX Series
●  C9130AXE-EWC-x: Cisco Catalyst 9130AX Series with Embedded Wireless Controller
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.
Cisco Wireless LAN Services
●  AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
●  AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
●  AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software Catalyst 9130AXE
●  Cisco Unified Wireless Network Software Release 8.10 MR1 or later
●  Cisco IOS XE Software Release 17.1.1 or later
Supported wireless LAN controllers ●  Cisco Catalyst 9800 Series Wireless Controllers
●  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
Note: C9130AXE-STA-x is not supported on AireOS controllers
802.11n version 2.0 (and related) capabilities ●  4x4 MIMO with four spatial streams
●  Maximal Ratio Combining (MRC)
●  802.11n and 802.11a/g
●  20- and 40-MHz channels
●  PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
●  802.11 Dynamic Frequency Selection (DFS)
●  Cyclic Shift Diversity (CSD) support
802.11ac ●  8x8 downlink MU-MIMO with eight spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80-, and 160-MHz channels
●  PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  Wi-Fi Protected Access (WPA) 3 support
802.11ax ●  8x8 uplink/downlink MU-MIMO with eight spatial streams
●  Uplink/downlink OFDMA
●  TWT
●  BSS coloring
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80-, and 160-MHz channels
●  PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  WPA3 support
Integrated antenna ●  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
External antenna with smart antenna connector ●  The Cisco Catalyst 9130AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)
●  Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
●  Supports Self-Identifiable Antennas (SIA) on the smart antenna connector
●  Smart antenna connector is a compact multi-RF connector with 8-DART interface
●  Requires the AIR-CAB002-D8-R= 2 ft smart antenna connector when used with antennas with a RP-TNC connector
●  Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna
●  For more details, see the Catalyst 9130AX Series Getting Started Guide.
●  For more details on C9130AXE-STA, see C-ANT9104 Hardware Installation Guide
Interfaces ●  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)
●  Management console port (RJ-45)
●  USB 2.0 at 4.5W
Indicators ●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H) ●  Access point (without mounting brackets):
◦  C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
Weight Cisco Catalyst 9130AXE
●  3.78 lb. (1.71 kg)
Input power requirements ●  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE)
●  Cisco power injector, AIR-PWRINJ6=
●  802.3af PoE
●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Cisco Catalyst 9130AXE
Power source 2.4-GHz radio 5-GHz radio Link speed USB Max PoE Power Consumption
802.3at (PoE+) 4x4 8x8 5G N 25.5W
802.3at (PoE+) 4x4 4x4 5G Y [4.5W] 25.5W
802.3bt (Cisco UPOE) 4x4 8x8 5G Y [4.5W] 30.5W
Cisco Catalyst 9130AXI and 9130AXE
Power source 2.4-GHz radio 5-GHz radio Link speed USB Max PoE Power Consumption
802.3af PoE 1x1 1x1 1G N 13.4W
Note:   Actual power consumption may very depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation.
Environmental Cisco Catalyst 9130AXE
●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
●  Operating temperature: -4° to 122°F (-20° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.(3000 m)
System memory ●  2048 MB DRAM
●  1024 MB flash
Warranty Limited lifetime hardware warranty
Available transmit power settings 2.4 GHz 5 GHz
●  23 dBm (200 mW) ●  26 dBm (400 mW)
●  -4 dBm(0.39 mW) ●  -1 dBm (0.79 mW)
Regulatory domains Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country
For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
Compliance standards ●  Safety: ●  Radio:
◦      IEC 60950-1 ◦      EN 300 328 (v2.1.1)
◦      EN 60950-1 ◦      EN 301 893 (v2.1.1)
◦      UL 60950-1 ◦      AS/NZS 4268 (rev. 2017)
◦      CAN/CSA-C22.2 No. 60950-1 ◦      47 CFR FCC Part 15C, 15.247, 15.407
◦      AS/NZS60950.1 ◦      RSP-100
◦      UL 2043 ◦      RSS-GEN
◦      Class III equipment ◦      RSS-247
●  Emissions: ◦      China regulations SRRC
◦      CISPR 32 (rev. 2015) ◦      LP0002 (rev 2018.1.10)
◦      EN 55032 (rev. 2012/AC:2013) ◦      Japan Std. 33a, Std. 66, and Std. 71
◦      EN 55032 (rev. 2015) ●  RF safety:
◦      EN61000-3-2 (rev. 2014) ◦      EN 50385 (rev. Aug 2002)
◦      EN61000-3-3 (rev. 2013) ◦      ARPANSA
◦      KN61000-3-2 ◦      AS/NZS 2772 (rev. 2016)
◦      KN61000-3-3 ◦      EN 62209-1 (rev. 2016)
◦      AS/NZS CISPR 32 Class B (rev. 2015) ◦      EN 62209-2 (rev. 2010)
◦      47 CFR FCC Part 15B ◦      47 CFR Part 1.1310 and 2.1091
◦      ICES-003 (rev. 2016 Issue 6, Class B) ◦      RSS-102
◦      VCCI-CISPR 32 ●  IEEE standards:
◦      CNS (rev. 13438) ◦      IEEE 802.3
◦      KN-32 ◦      IEEE 802.3ab
◦      QCVN 118:2018/BTTTT ◦      IEEE 802.3af/at
●  Immunity: ◦      IEEE 802.11a/b/g/n/ac/ax
◦      CISPR 24 (rev. 2010) ◦      IEEE 802.11h, 802.11d
◦      EN 55024 + AMD 1(rev. 2010) ●  Security:
◦      EN 55035: 2017 ◦      802.11i, (WPA2, WPA3
◦      KN35 ◦      802.1X
●  Emissions and immunity: ◦      Advanced Encryption Standard (AES)
◦      EN 301 489-1 (v2.1.1 2017-02) ●  Extensible Authentication Protocol (EAP) types:
◦      EN 301 489-17 (v3.1.1 2017-02) ◦      EAP-Transport Layer Security (TLS)
◦      QCVN (18:2014) ◦      EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
◦      QCVN 112:2017/BTTTT ◦      Protected EAP (PEAP) v0 or EAP-MSCHAP v2
◦      KN 489-1 ◦      EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦      KN 489-17 ◦      PEAP v1 or EAP-Generic Token Card (GTC)
◦      EN 60601-1-2:2015 ◦      EAP-Subscriber Identity Module (SIM)
◦      EN 61000-6-1: 2007
Data rate, transmit power, receive sensitivity For more detailed information about data rate, transmit power, and receive sensitivity, please refer to the Cisco RF details.
Transmit (Tx) power and receive (Rx) sensitivity
5-GHz primary radio 5-GHz secondary radio 2.4-GHz radio
Spatial streams Number of active antennas Total Tx power (dBm) Rx sensitivity (dBm) Total Tx power (dBm) Rx sensitivity (dBm) Total Tx power (dBm) Rx sensitivity (dBm)
802.11/11b
1 Mbps 1 4 23 -104
11 Mbps 1 4 23 -96
802.11a/g
6 Mbps 1 4 23 -100 23 -99 23 -98
24 Mbps 1 4 22 -92 22 -92 22 -91
54 Mbps 1 4 21 -84 21 -83 20 -82
802.11n HT20
MCS0 1 4 23 -99 23 -99 23 -98
MCS31 4 4 20 -77 20 -77 20 -75
802.11n HT40
MCS0 1 4 23 -96 23 -96
MCS31 4 4 20 -75 20 -75
802.11ac VHT20
MCS0 1 4 23 -100 23 -99
MCS9 4 4
MCS0 1 8 26 -102
MCS8 8 8 23 -73
MCS9 8 8
802.11ac VHT40
MCS0 1 4 23 -96 23 -96
MCS9 4 4 19 -69 19 -69
MCS0 1 8 26 -99
MCS9 8 8 22 -69
802.11ac VHT80
MCS0 1 4 23 -93 23 -93
MCS9 4 4 19 -65 19 -64
MCS0 1 8 26 -95
MCS9 8 8 22 -65
802.11ac VHT160
MCS0 1 4 26 -89
MCS9 4 4 21 -61
802.11ax HE20
MCS0 1 4 23 -99 23 -99 23 -98
MCS11 4 4 18 -66 18 -66 17 -65
MCS0 1 8 26 -102
MCS11 8 8 21 -65
802.11ax HE40
MCS0 1 4 23 -96 23 -96
MCS11 4 4 18 -63 18 -62
MCS0 1 8 26 -99
MCS11 8 8 21 -63
802.11ax HE80
MCS0 1 4 23 -93 23 -93
MCS11 4 4 17 -59 17 -59
MCS0 1 8 26 -96
MCS11 8 8 20 -59
802.11ax HE160
MCS0 1 4 26 -88
MCS11 4 4 19 -56

C9130AXE-H Warranty

Low Price Guarantee
Customers can get high quality products at wholesale prices

Quality Assurance
All products sold are original genuine goods, new packaging unopened

Free CCIE Expert Technical Support
We provide our customers with free CCIE technical support via phone, intelligent AI and email

Commodity Refund Guarantee
For equipment purchased from us, please contact our customer service team for return and replacement services

Diversified and Flexible Transportation Services
Cargo carriers include Fedex, DHL, UPS, Aramex, TNT, EMS

Standard Policy
1 Year