C9117AXI-A - Cisco Catalyst 9100 Series Indoor Wi-Fi 6 Access Points

C9117AXI-A
Price:US $757.00
C9117AXI-A - Cisco Catalyst 9100 Series Indoor Wi-Fi 6 Access Points
C9117AXI-A - Cisco Catalyst 9100 Series Indoor Wi-Fi 6 Access Points

C9117AXI-A - Cisco Catalyst 9100 Series Indoor Wi-Fi 6 Access Points

C9117AXI-A

Cisco Catalyst 9117AX Access Point, Internal antenna; Wi-Fi 6; 8x8:8 MIMO, A Domain, dual-band, controller-based 802.11ax.

New Factory Sealed
US$ 757.00
mastercard paypal t-t visa
C9117AXI-A - Cisco Catalyst 9100 Series Indoor Wi-Fi 6 Access Points
Engineer Team Support
7*24h Online
  • 763 412 7282
  • +86 010 82830816

C9117AXI-A Overview

The Cisco Catalyst 9117 Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.


As one of the Cisco Catalyst 9100 Access Points, C9117AXI-A provides high-performance Wi-Fi 6 (802.11ax) capabilities and innovations in RF performance, security, and analytics, enables end-to-end digitization and helps accelerate the rollout of business services by delivering beyond Wi-Fi.


With the Catalyst 9117 Series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an Office Extend Access Point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how.

Extending Cisco’s intent-based network and perfect for networks of all sizes, the Catalyst 9117 Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The Catalyst 9117 Series is also a leader in performance, security, and analytics.

The Catalyst 9117 Series Access Points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides.

C9117AXI-A Specification

Item Specification
Part numbers Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller
●  C9117AXI-EWC-x: Cisco Catalyst 9117
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.
Cisco Wireless LAN Services
●  AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
●  AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
●  AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software ●  Cisco Unified Wireless Network Software Release 8.9 or later
●  Cisco IOS XE Software Release 16.11 or later
Supported wireless LAN controllers ●  Cisco Catalyst 9800 Series Wireless Controllers
●  Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities ●  8x8 MIMO with four spatial streams for 5-GHz band
●  4x4 MIMO with four spatial streams for 2.4-GHz band
●  Maximal Ratio Combining (MRC)
●  20- and 40-MHz channels
●  PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  Cyclic Shift Diversity (CSD) support
802.11ac ●  8x8 downlink MU-MIMO with eight spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80, and 160-MHz channels
●  PHY data rates up to 3.5 Gbps at 5 GHz
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  CSD support
●  160 MHz support only on 4-spatial stream
802.11ax ●  8x8 MIMO with eight spatial streams for 5-GHz band
●  4x4 MIMO with four spatial streams for 2.4-GHz band
●  Downlink OFDMA
●  TWT
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80, and 160-MHz channels
●  PHY data rates up to 5 Gbps at 5 GHz
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  CSD support
Integrated antenna ●  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces ●  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
●  Management console port (RJ-45)
●  USB 2.0 with up to 4.5W (enabled via future software)
Indicators ●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H) ●  Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
●  Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
Weight ●  3.02 lb (1.4 kg)
Input power requirements ●  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE)
●  Cisco power injector, AIR-PWRINJ6=
●  802.3af PoE
●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.
Power draw 802.3bt Cisco UPOE+ Cisco UPOE Full Feature
Power source Power type 2.4-GHz 5-GHz Link speed USB LLDP
radio radio
802.3bt Cisco PoE 4x4 8x8 5 Gbps Y 28.9W
UPOE+, Cisco
UPOE
802.3at Full Feature*
Power source Power type 2.4-GHz 5-GHz Link speed USB LLDP
radio radio
802.3at PoE 4x4 8x8 5 Gbps N 25.4W
802.3af Reduced Feature
Power source Power type 2.4-GHz 5-GHz Link speed USB LLDP
radio radio
802.3af PoE 2x2 2x2 2.5 Gbps N 13.5W
* USB port can be enabled, but the 5-GHz radio will be reduced to 4x4.
Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues
Environmental ●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
●  Operating temperature: 32° to 122°F (0° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.
System memory ●  2048 MB DRAM
●  1024 MB flash
Warranty Limited lifetime hardware warranty
Available transmit power settings 2.4 GHz 5 GHz
●  23 dBm (200 mW) ●  26 dBm (400 mW)
●  -6 dBm (0.25 mW) ●  -4 dBm (0.4 mW)
Regulatory domains Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.
For information about Regulatory Domain support, refer to the Cisco Regulatory Domain White Paper
Compliance standards ●  Safety: ◦    EN 301 893 (v2.1.1)
◦    IEC 60950-1 ◦    AS/NZS 4268 (rev. 2017)
◦    EN 60950-1 ◦    47 CFR FCC Part 15C, 15.247, 15.407
◦    AS/NZS 60950.1 ◦    RSP-100
◦    UL 60950-1 ◦    RSS-GEN
◦    CAN/CSA-C22.2 No. 60950-1 ◦    RSS-247
◦    UL 2043 ◦    China regulations SRRC
◦    Class III equipment ◦    LP0002 (rev 2018.1.10)
●  Emissions: ◦    Japan Std. 33a, Std. 66, and Std. 71
◦    CISPR 32 (rev. 2015) ◦    EMI and susceptibility (Class B)
◦    EN 55032 (rev. 2012/AC:2013) ●  RF safety:
◦    EN 55032 (rev. 2015) ◦    EN 50385 (rev. Aug 2002)
◦    EN61000-3-2 (rev. 2014) ◦    ARPANSA
◦    EN61000-3-3 (rev. 2013) ◦    AS/NZS 2772 (rev. 2016)
◦    KN61000-3-2 ◦    EN 62209-1 (rev. 2016)
◦    KN61000-3-3 ◦    EN 62209-2 (rev. 2010)
◦    AS/NZS CISPR 32 Class B (rev. 2015) ◦    47 CFR Part 1.1310 and 2.1091
◦    47 CFR FCC Part 15B ◦    RSS-102
◦    ICES-003 (rev. 2016 Issue 6, Class B) ●  IEEE standards:
◦    VCCI (V3) ◦    IEEE 802.3
◦    CNS (rev. 13438) ◦    IEEE 802.3ab
◦    KN-32 ◦    IEEE 802.3af/at/bt
◦    TCVN 7189 (rev. 2009) ◦    IEEE 802.11 a/b/g/n/ac/ax
●  Immunity: ◦    IEEE 802.11h, 802.11d
◦    CISPR 24 (rev. 2010) ●  Security:
◦    EN 55024/EN 55035 (rev. 2010) ◦    802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA
●  Emissions and immunity: ◦    802.1X
◦    EN 301 489-1 (v2.1.1 2017-02) ◦    Advanced Encryption Standard (AES)
◦    EN 301 489-17 (v3.1.1 2017-02) ●  Extensible Authentication Protocol (EAP) types:
◦    QCVN (18:2014) ◦    EAP-Transport Layer Security (TLS)
◦    KN 489-1 ◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦    KN 489-17 ◦    Protected EAP (PEAP) v0 or EAP-MSCHAPv2
●  Radio: ◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦    EN 300 328 (v2.1.1) ◦    PEAP v1 or EAP-Generic Token Card (GTC)
◦    EAP-Subscriber Identity Module (SIM)
Datarate/Transmit Power/ Receive sensitivity For more detailed information about Datarate/TX Power/Receive sensitivity, Please refer Cisco RF Details
Transmit power and receive sensitivity
5-GHz radio 2.4-GHz radio
Spatial streams Total transmit power (dBm) Receive sensitivity (dBm) Total transmit power (dBm) Receive sensitivity (dBm)
802.11/11b
1 Mbps 1 - - 23 -98
11 Mbps 1 - - 23 -89
802.11a/g
6 Mbps 1 23 -95 23 -94
24 Mbps 1 22 -88 22 -87
54 Mbps 1 21 -79 20 -78
802.11n HT20
MCS0 1 23 -95 23 -94
MCS31 4 20 -74 20 -73
802.11n HT40
MCS0 1 23 -93 - -
MCS31 4 20 -72 - -
802.11ac VHT20
MCS0 1 23 -95 - -
MCS8 1 20 -75 - -
MCS9 1 NA NA - -
MCS0 2 23 -95 - -
MCS8 2 20 -74 - -
MCS9 2 NA NA - -
MCS0 3 23 -95 - -
MCS9 3 19 -72 - -
MCS0 4 23 -94 - -
MCS9 4 19 -71 - -
802.11ac VHT40
MCS0 1 23 -94 - -
MCS9 1 19 -71 - -
MCS0 2 23 -93 - -
MCS9 2 19 -70 - -
MCS0 3 23 -92 - -
MCS9 3 19 -69 - -
MCS0 4 23 -91 - -
MCS9 4 19 -68 - -
802.11ac VHT80
MCS0 1 23 -91 - -
MCS9 1 19 -67 - -
MCS0 2 23 -90 - -
MCS9 2 19 -66 - -
MCS0 3 23 -89 - -
MCS9 3 19 -65 - -
MCS0 4 23 -88 - -
MCS9 4 19 -64 - -
802.11ac VHT160
MCS0 1 23 -88 - -
MCS9 1 18 -65 - -
MCS0 2 23 -87 - -
MCS9 2 18 -64 - -
MCS0 3 23 -86 - -
MCS9 3 18 -63 - -
MCS0 4 23 -85 - -
MCS9 4 18 -62 - -
802.11ax HE20
MCS0 1 23 -95 23 -94
MCS11 1 18 -68 16 -67
MCS0 2 23 -95 23 -94
MCS11 2 18 -67 16 -66
MCS0 3 23 -95 23 -94
MCS11 3 18 -66 16 -65
MCS0 4 23 -94 23 -93
MCS11 4 18 -65 16 -64
802.11ax HE40
MCS0 1 23 -94
MCS11 1 18 -65
MCS0 2 23 -93
MCS11 2 18 -64
MCS0 3 23 -92
MCS11 3 18 -63
MCS0 4 23 -91
MCS11 4 18 -62
802.11ax HE80
MCS0 1 23 -91 - -
MCS11 1 17 -63 - -
MCS0 2 23 -90 - -
MCS11 2 17 -62 - -
MCS0 3 23 -89 - -
MCS11 3 17 -61 - -
MCS0 4 23 -88 - -
MCS11 4 17 -60 - -
802.11ax HE160
MCS0 1 23 -88 - -
MCS11 1 16 -59 - -
MCS0 2 23 -87 - -
MCS11 2 16 -58 - -
MCS0 3 23 -86 - -
MCS11 3 16 -57 - -
MCS0 4 23 -85 - -
MCS11 4 16 -56 - -

C9117AXI-A Warranty

Low Price Guarantee
Customers can get high quality products at wholesale prices

Quality Assurance
All products sold are original genuine goods, new packaging unopened

Free CCIE Expert Technical Support
We provide our customers with free CCIE technical support via phone, intelligent AI and email

Commodity Refund Guarantee
For equipment purchased from us, please contact our customer service team for return and replacement services

Diversified and Flexible Transportation Services
Cargo carriers include Fedex, DHL, UPS, Aramex, TNT, EMS

Standard Policy
1 Year